/live/media/SE/SE_22441187_Ang.jpg)
Sealed Power 224-41187 Engine Oil Pump
| Brand | Sealed Power 224-41187 |
|---|---|
| Width | 196.85 |
| Width | 7.750 |
| Height | 12.750 |
| Height | 323.85 |
| Grade Type | Premium |
| Gasket Or Seal Included | Yes |
| Mounting Hole Quantity | 3 |
| Housing Material | Cast iron |
| Drive Type | Drive shaft |
| Oil Pump Type | Gear |
| Pickup Screen Diameter | 0.930 |
| Pickup Screen Diameter | 23.62 |
| Mounting Hole Diameter | 0.315 |
| Mounting Hole Diameter | 8.0 |
| Oil Pump Pressure Type | Standard pressure |
| Oil Pump Volume Type | Standard volume |
| Part Description | Engine oil pump |
| Fits | — |
Gear oil pump. Delivers standard pressure and standard volume for dependable engine lubrication.
Cast iron housing. Adds strength and durability for demanding rebuilds.
Gasket or seal included. Helps simplify installation with the needed sealing component.
Cross-references Eastern Catalytic 41187, Gates A71 and Walker Exhaust 50064 for the same application. See all 16.
Engine Oil Pump for Vintage Rebuilds
The Sealed Power 224-41187 engine oil pump is built for vintage engine applications over 35 years old, where consistent oil delivery and durable construction matter during a rebuild. It is a premium-grade gear-style pump with a cast iron housing, standard pressure output, and standard volume flow for classic engine service.
For restorations and engine rebuilds, this Sealed Power oil pump supports dependable lubrication performance in older applications such as Ford and International Harvester engines commonly searched by make/model and part number, including 224-41187.
Key Features
- Premium-grade engine oil pump for vintage applications
- Gear-type design with drive shaft operation
- Cast iron housing for durability in rebuild environments
- Standard pressure and standard volume configuration
- Gasket or seal included for installation preparation
- Three mounting holes with 8.0 mm mounting hole diameter
- Pickup screen diameter: 23.62 mm
Detailed Product Overview
Sealed Power Vintage components are intended for classic engine service where original-style fit and reliable lubrication are important. Part number 224-41187 uses a gear pump design and cast iron construction to support long-term performance in older engines that need a replacement oil pump during overhaul or restoration. The included gasket or seal helps simplify the rebuild process, while the standard pressure and standard volume setup keeps the pump aligned with common vintage engine requirements.
This part cross-references Eastern Catalytic 41187 for the same application.
Common Problems This Part Can Address
- Low oil pressure caused by a worn or failing pump
- Inconsistent oil circulation after an engine rebuild
- Excessive wear in the original pump housing or gears
- Oil delivery issues in vintage engine restoration projects
- Leak concerns at the pump interface when replacing a worn unit
Installation Notes and Tips
Verify pump drive engagement, mounting hole alignment, and pickup screen clearance before final assembly. Clean the mounting surface thoroughly and confirm the gasket or seal seats correctly during installation. Always prime the oiling system and check pressure during initial startup after replacing an engine oil pump.
Quality Assurance
Sealed Power Vintage components are manufactured with modern materials and ISO- and QS-certified processes to support performance and longevity in classic engine rebuilds. This makes the 224-41187 a practical choice for restoration work where dependable lubrication and durable construction are priorities.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||