/live/media/SE/SE_69185CP_Ang.jpg)
Sealed Power 6-9185CP Engine Connecting Rod Bearing Set
| Brand | Sealed Power 6-9185CP |
|---|---|
| Housing Bore Max (Inch) | 2.1680 |
| Housing Bore Max (MM) | 55.0670 |
| Housing Bore Min (Inch) | 2.1675 |
| Housing Bore Min (MM) | 55.0550 |
| Oil Clearance Max (Inch) | 0.0021 |
| Oil Clearance Max (MM) | 0.0530 |
| Oil Clearance Min (Inch) | 0.0005 |
| Oil Clearance Min (MM) | 0.0130 |
| Overall Length Max (Inch) | 1.0000 |
| Overall Length Max (MM) | 25.4000 |
| Pair / Full / Half - Flange | P |
| Standard Shaft Max (Inch) | 2.0625 |
| Standard Shaft Max (MM) | 52.3880 |
| Standard Shaft Min (Inch) | 2.0615 |
| Standard Shaft Min (MM) | 52.3620 |
| Wall Thickness Max (Inch) | 0.0525 |
| Wall thickness Max (MM) | 1.3340 |
| Fits | Dodge, Plymouth, and Fargo |
Standard size set. Fits a standard rebuild without changing bearing dimensions.
Full set. Supplies the complete bearing set for a thorough engine rebuild.
Vintage components. Restores classic engines with modern materials and certified manufacturing.
Cross-references CB60G6 for the same application. See all 1.
Sealed Power 6-9185CP Connecting Rod Bearings
Sealed Power 6-9185CP is a vintage engine connecting rod bearing set for classic rebuilds that need standard-size fitment and consistent oil clearance control. Built for applications over 35 years old, it supports restoration work where original-style dimensions and dependable bearing performance matter.
Key Features
- Standard size connecting rod bearing set for vintage engine rebuilds
- Housing bore range: 2.1675-2.1680 in. (55.0550-55.0670 mm)
- Standard shaft range: 2.0615-2.0625 in. (52.3620-52.3880 mm)
- Oil clearance range: 0.0005-0.0021 in. (0.0130-0.0530 mm)
- Overall length: 1.0000 in. (25.4000 mm)
- Wall thickness up to 0.0525 in. (1.3340 mm)
- Manufactured with ISO- and QS-certified processes for rebuild consistency
Detailed Description
Sealed Power 6-9185CP is built for classic engine service where standard dimensions and bearing geometry must match the original crankshaft and rod specifications. The part number 6-9185CP is intended for vintage applications and is a practical choice for restoring older engines to proper operating clearances. This bearing set cross-references CB60G6 for the same application.
For buyers searching for Sealed Power 6-9185CP engine connecting rod bearings, vintage engine rebuild parts, or standard-size rod bearings for classic car restoration, this component provides the dimensional data needed for accurate selection. It is a strong match for rebuilders working on older make/model applications where precise housing bore and shaft measurements are critical.
What It Helps Address
- Rod bearing wear that causes low oil pressure or noisy bottom-end operation
- Out-of-spec bearing clearance during a classic engine rebuild
- Scored or fatigued connecting rod bearing surfaces
- Restoration work requiring standard-size bearing dimensions
- Fitment matching for older engine applications in classic make/model rebuilds
Installation Notes and Tips
Verify crankshaft journal size, connecting rod housing bore, and oil clearance before assembly. Measure each journal and rod bore during engine teardown, then confirm the standard-size dimensions listed for 6-9185CP before final installation. Clean all mating surfaces thoroughly and follow the engine builder’s torque and lubrication specifications during assembly. For classic make/model rebuilds, confirm the bearing application against the engine code and service data before ordering.
Quality Assurance
Sealed Power Vintage components are produced for older applications with manufacturing controls that support rebuild accuracy and long-term service. The brand’s ISO- and QS-certified production standards help maintain dimensional consistency for classic engine work, including Sealed Power 6-9185CP.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||