/live/media/CR/CR_CIR40_Ang.jpg)
SKF CIR40 Wheel Bearing Retaining Ring - Front
| Brand | SKF CIR40 |
|---|---|
| Position | Front |
| Inside Diameter | 2.795 |
| Width | 0.096 |
| Outside Diameter | 3.267 |
| Fits | Hyundai and Kia · 23 vehicles |
OEM-spec C-clip retainer. Helps secure the wheel bearing for a reliable fit.
Wheel bearing retainer. Used to hold the bearing in place during service.
SKF engineering. Built to meet or exceed OEM specifications.
Cross-references 51718-2D010 and 517182D000 for the same application. See all 2.
SKF CIR40 Wheel Bearing Retaining Ring
SKF CIR40 is a wheel bearing retaining ring used with generation one wheel bearings to secure the bearing inside the steering knuckle. It is built to OE-level dimensions for a precise fit on front wheel bearing applications, including Hyundai Elantra, Hyundai Tiburon, Kia Spectra, and Kia Spectra5 models.
Key Features
- Part number: CIR40
- Inside diameter: 2.795 in.
- Outside diameter: 3.267 in.
- Width: 0.096 in.
- Used to retain the wheel bearing inside the steering knuckle
- Made to meet or exceed OEM specifications
- Fits front applications for select Hyundai and Kia vehicles
Detailed Description
The SKF CIR40 wheel bearing retaining ring is a direct-fit C-clip retainer for generation one wheel bearings. Its measured dimensions of 2.795-inch inside diameter, 3.267-inch outside diameter, and 0.096-inch width support accurate seating during wheel bearing service. This retaining ring is used on front applications for 2001-2006 Hyundai Elantra, 2003-2008 Hyundai Tiburon, 2004-2009 Kia Spectra, and 2005-2009 Kia Spectra5. If you are replacing a hub unit on a Hyundai Elantra or Kia Spectra, CIR40 provides the correct retaining-ring style for the job. This part cross-references Hyundai/Kia OE numbers 51718-2D010 and 517182D000 for the same application.
What It Helps Address
- Rusted retaining rings removed during wheel bearing service
- Damaged C-clips that no longer hold the bearing securely
- Loose wheel bearing retention inside the steering knuckle
- Incorrect fitment when replacing front hub or bearing assemblies
- Repeat service caused by worn OE-style clips
Installation Notes
Inspect the steering knuckle and bearing seat before installation. Replace any retaining ring that shows corrosion, distortion, or damage from removal. Confirm the bearing style and front position before ordering, and verify the ring seats fully in the groove during assembly.
Quality Assurance
SKF manufactures this retaining ring to meet or exceed OEM specifications and test requirements. SKF has supplied engineered automotive solutions for more than 100 years, with a focus on consistent fit and service life.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2009 | Kia | Spectra | — | — | Front | — |
| 2009 | Kia | Spectra5 | — | — | Front | — |
| 2008 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2008 | Kia | Spectra | — | — | Front | — |
| 2008 | Kia | Spectra5 | — | — | Front | — |
| 2007 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2007 | Kia | Spectra | — | — | Front | — |
| 2007 | Kia | Spectra5 | — | — | Front | — |
| 2006 | Hyundai | Elantra | — | — | Front | — |
| 2006 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2006 | Kia | Spectra | — | — | Front | — |
| 2006 | Kia | Spectra5 | — | — | Front | — |
| 2005 | Hyundai | Elantra | — | — | Front | — |
| 2005 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2005 | Kia | Spectra | — | — | Front | — |
| 2005 | Kia | Spectra5 | — | — | Front | — |
| 2004 | Hyundai | Elantra | — | — | Front | — |
| 2004 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2004 | Kia | Spectra | 2.0L | L4 | Front | — |
| 2003 | Hyundai | Elantra | — | — | Front | — |
| 2003 | Hyundai | Tiburon | 2.0L | L4 | Front | — |
| 2002 | Hyundai | Elantra | — | — | Front | — |
| 2001 | Hyundai | Elantra | — | — | Front | — |
| No rows match your filter. | ||||||