Sparta PN3088 Fuel Pump Module Assembly

Fuel Pump Module Assembly for Audi Applications

Sparta PN3088 is a standard replacement in-tank fuel pump module assembly for select Audi models. Built for gasoline systems, it uses a turbine-style electric pump with a 12-volt design, 51-80 psi pressure range, and an average flow rating of 45, making it a direct-fit service part for higher-mileage and earlier-model vehicles.

Key Features

• Fuel pump module assembly for in-tank gasoline applications
• Specific fit design for select Audi A6 Quattro, Allroad Quattro, and S6 models
• Electric turbine pump design with 8-amp average current draw
• Includes gasket/seal and external strainer
• Plastic housing with 1 oval connector, 4 terminals, and 2 hose outlets
• Package contents: fuel pump module assembly without float arm, seal, and instruction sheet

Detailed Description

Sparta PN3088 is engineered as a standard replacement fuel pump module assembly for gasoline-powered Audi vehicles that require an in-tank pump. It features a turbine pump design, female oval connector, male terminals, and a hose-style outlet layout with two outlets and a 0.375-inch outside diameter. The assembly is supplied with a nitrile rubber seal and external strainer, while the fuel sending unit, regulator, lock ring, mounting hardware, fuel filter, and wire harness are not included. This part cross-references Bosch 69361 for the same application.

Compatible with 2000-2004 Audi A6 Quattro, 2001-2005 Audi Allroad Quattro, and 2002-2003 Audi S6, Sparta PN3088 is a practical choice when replacing a worn fuel pump module on these Audi platforms. If you are searching for a fuel pump module assembly for Audi A6 Quattro, Audi Allroad Quattro, or Audi S6 models, PN3088 provides the fitment and electrical specifications needed for a direct replacement service job.

What It Helps Address

• Hard starting caused by a weak or failing in-tank fuel pump
• Engine hesitation from inconsistent fuel delivery
• Low fuel pressure conditions within the 51-80 psi operating range
• Fuel delivery loss from a worn pump module assembly
• Service replacement on higher-mileage Audi fuel systems

Installation Notes and Tips

Install this module in the fuel tank and verify the connector shape, terminal count, outlet style, and pressure requirements before installation. Because mounting hardware, lock ring, float arm, and wire harness are not included, reuse or source the required vehicle-specific components as needed. Always confirm the seal is seated correctly and inspect the tank opening and fuel lines before reassembly.

Quality Assurance

Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier-model and higher-mileage vehicles where fit and fuel-system performance matter. PN3088 is built as a specific-fit, standard replacement fuel pump module assembly for the listed Audi applications.