/live/media/DE/DE_PN3089_FRO.JPG)
Sparta PN3089 Fuel Pump Module Assembly
| Brand | Sparta PN3089 |
|---|---|
| Fuel Sending Unit Included | Yes |
| Negative Ground | No |
| Outlet Outside Diameter | 0.375 |
| Voltage | 12 |
| Fuel Type | Gas |
| Regulator Included | No |
| Maximum Pressure | 65 |
| Terminal Type | Blade |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Wire Quantity | 4 |
| Grade Type | Standard replacement |
| Connector Quantity | 1 |
| Connector Shape | Oval |
| Gasket Or Seal Included | Yes |
| Housing Material | Plastic |
| Installation Warnings | No |
| Terminal Quantity | 4 |
| Lock Ring Included | No |
| Connector Gender | Female |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Outlet Quantity | 2 |
| Fuel Filter Included | No |
| In Tank or External | In tank |
| Resistance Ohms Empty | 40 |
| Resistance Ohms Full | 250 |
| Gasket Or Seal Material | Nitrile rubber |
| Fits | Pontiac · 1 vehicle |
OE-supplier backed. Distributed by Delphi, the OE fuel expert behind the brand.
Specific fit. Made for a direct, vehicle-specific replacement.
Complete module. Includes the pump, float arm, seal, splice kit, and instruction sheet.
Cross-references Airtex Fuel Pumps E3539M, Autobest F2540A and Bosch 67455 for the same application. See all 22.
Fuel Pump Module Assembly for 2004 Pontiac Montana
Sparta PN3089 is a specific-fit fuel pump module assembly for the 2004 Pontiac Montana. It includes the fuel sending unit, strainer, gasket/seal, wire harness, and fuel tank pressure sensor for a direct replacement approach on gas-powered applications.
Key Features
- Specific-fit fuel pump module assembly for 2004 Pontiac Montana
- 12-volt electric turbine pump design with in-tank installation
- Fuel sending unit included for accurate tank level reporting
- Fuel tank pressure sensor included
- Quick-connect outlet with two outlets and 0.375 in. outside diameter
- Standard replacement grade with plastic housing
- Seal, strainer, and splice kit included
- 4-wire, 4-terminal blade connection with female connector
- Operating pressure range: 52 to 65 psi
- Average flow rating: 17 and average current draw: 7
Product Details
Built for higher-mileage and earlier-model vehicles, Sparta PN3089 is distributed by Delphi, an OE fuel system supplier. This fuel pump module assembly is engineered for gas fuel systems and uses an electric turbine pump layout for in-tank service. The assembly includes the float arm, seal, splice kit, and instruction sheet, helping streamline replacement of the fuel delivery module on the 2004 Pontiac Montana. This part number, PN3089, is also referenced in cross applications such as Bosch 67455 and Carter P74900M for the same application.
Common Issues This Part Can Address
- Hard starting caused by weak fuel delivery
- Engine stalling from inconsistent pump output
- Incorrect fuel level readings from a worn sending unit
- Fuel pressure loss within the 52 to 65 psi operating range
- Poor drivability related to an aging in-tank pump module
Installation Notes
Install this module in the fuel tank using the existing vehicle-specific configuration. Verify connector shape, terminal count, outlet style, and pressure requirements before installation. The package includes a gasket or seal and a wire harness, but does not include mounting hardware or a lock ring. Confirm the tank opening and electrical connections on the 2004 Pontiac Montana before final assembly.
Quality Assurance
Sparta is backed by Delphi distribution and OE fuel system expertise, with a focus on fit and performance for earlier-model, higher-mileage vehicles. PN3089 is built as a standard replacement fuel pump module assembly for direct-fit service on the 2004 Pontiac Montana.
| Year | Make | Model | Wheel Base | Position | Notes |
|---|---|---|---|---|---|
| 2004 | Pontiac | Montana | 112.0" | N/A | — |
| No rows match your filter. | |||||