/live/media/DE/DE_PN3263_FRO.JPG)
Sparta PN3263 Fuel Pump Module Assembly
| Brand | Sparta PN3263 |
|---|---|
| Fuel Sending Unit Included | Yes |
| Negative Ground | No |
| Outlet Outside Diameter | 0.313 |
| Voltage | 12 |
| Fuel Type | Gas |
| Regulator Included | No |
| Maximum Pressure | 109 |
| Terminal Type | Blade |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Grade Type | Standard replacement |
| Connector Quantity | 1 |
| Connector Shape | Trapezoid |
| Gasket Or Seal Included | Yes |
| Housing Material | Plastic |
| Installation Warnings | No |
| Terminal Quantity | 4 |
| Lock Ring Included | Yes |
| Connector Gender | Female |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Outlet Quantity | 2 |
| Fuel Filter Included | Yes |
| In Tank or External | In tank |
| Resistance Ohms Empty | 200 |
| Resistance Ohms Full | 8 |
| Gasket Or Seal Material | Nitrile rubber |
| Minimum Pressure | 73 |
| Fits | Hyundai · 1 vehicle |
OE-supplier backed. Distributed by Delphi, with fit and performance informed by OE expertise.
Specific-fit module. A direct replacement fuel pump assembly for in-tank applications.
Complete service parts. Includes the pump module, seal, lock ring, float arm, and fuel filter.
Cross-references Carter P76756M, 31110-3Q500 and 4010752 for the same application. See all 10.
Fuel Pump Module for 2011 Sonata
The Sparta PN3263 fuel pump module assembly is a specific-fit, in-tank replacement for the 2011 Hyundai Sonata. Built for gasoline applications, it combines the pump, sending unit, fuel filter, strainer, seal, lock ring, and fuel tank pressure sensor in one service assembly.
Key Features
- Specific-fit fuel pump module assembly for 2011 Hyundai Sonata
- In-tank electric turbine pump with 12-volt operation
- Fuel sending unit included for accurate fuel level reporting
- Fuel tank pressure sensor included
- Fuel filter, external strainer, gasket/seal, and lock ring included
- Quick-connect outlet design with 2 outlets and 1 female connector
- Standard replacement grade for gasoline fuel systems
- Maximum pressure rating: 109 psi; average flow rating: 55
Detailed Description
Sparta PN3263 is a standard replacement fuel pump module assembly engineered for higher-mileage and earlier-model vehicles, backed by Delphi OE fuel system expertise. It is built for in-tank installation and uses a turbine-style electric pump with a plastic housing, blade terminals, and a trapezoid connector for a direct-fit service replacement. The assembly is configured for gasoline fuel systems and includes the fuel sending unit, fuel filter, strainer, gasket or seal, lock ring, and fuel tank pressure sensor. This part cross-references Carter P76756M for the same application.
Common Repair Uses
- Hard starting caused by weak fuel delivery
- Fuel pressure loss under load
- Inaccurate fuel level readings from a worn sending unit
- Fuel pump noise or intermittent pump operation
- Fuel tank pressure sensor-related service replacement
Installation Notes
Install this module in the fuel tank and verify the quick-connect outlet, connector shape, and terminal count before assembly. Replace the seal and lock ring during service, and confirm the fuel system is depressurized before removal. This PN3263 assembly is listed for 2011 Hyundai Sonata applications only, so match the vehicle year, make, and model before ordering.
Quality Assurance
Sparta is distributed through Delphi, an OE full-line fuel supplier, and is positioned for service on higher-mileage and earlier-model vehicles. PN3263 is built as a direct replacement fuel pump module assembly for the specified application.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2011 | Hyundai | Sonata | 2.4L | L4 | GAS | N/A | — |
| No rows match your filter. | |||||||