/live/media/DE/DE_PN4014_FRO.JPG)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Sparta PN4014 Fuel Pump Hanger Assembly
| Brand | Sparta PN4014 |
|---|---|
| Material | Metal |
| Fuel Sending Unit Included | Yes |
| Negative Ground | No |
| Outlet Outside Diameter | 0.375 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Maximum Pressure | 94.0 |
| Terminal Type | Pin |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Grade Type | Standard replacement |
| Connector Shape | Round |
| Gasket Or Seal Included | Yes |
| Terminal Quantity | 4 |
| Lock Ring Included | No |
| Connector Gender | Female |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Inlet Quantity | 1 |
| Outlet Quantity | 2 |
| In Tank or External | In tank |
| Fuel Pump Included | Yes |
| Resistance Ohms Empty | 15.0 |
| Resistance Ohms Full | 160.0 |
| Gasket Or Seal Material | Nitrile rubber |
| Minimum Pressure | 44 |
| Internal Or External Strainer | External |
| Pump Design | Turbine |
| Fits | Ford · 19 vehicles |
OE-backed design. Distributed by Delphi for fit and performance expertise.
Complete hanger assembly. Includes the fuel pump, sending unit, strainer, and seal.
Specific in-tank fit. Standard replacement for a direct, application-specific install.
Cross-references Airtex Fuel Pumps E2365S, Airtex Fuel Pumps E2515 and Autobest F1376A for the same application. See all 18.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Hanger Assembly for Ford Vans
Sparta PN4014 is a standard replacement fuel pump hanger assembly for gasoline applications that require an in-tank electric pump, fuel sending unit, and strainer. Built with a metal housing and specific fit design, it serves higher-mileage and earlier model vehicles with OE-style placement and connections.
Compatible with Ford E-150, E-250, and E-350 Super Duty applications, this assembly is built for direct replacement service on select 2004-2008 vans. The Sparta PN4014 fuel pump hanger assembly is also a fit for 2004-2005 Ford E-150 Club Wagon and E-350 Club Wagon models.
Key Features
- Fuel pump hanger assembly with float arm and instruction sheet
- Specific fit for select Ford E-Series applications
- In-tank electric turbine pump design
- Fuel sending unit included
- Strainer and gasket/seal included
- Metal construction for standard replacement service
- 12-volt gasoline fuel system application
- Quick-connect outlet with 2 outlet ports
- Average flow rating of 26.0 and pressure range of 44 to 94
Detailed Description
Sparta PN4014 is a fuel pump hanger assembly engineered for gasoline fuel systems that use an in-tank electric pump. It includes the fuel pump, fuel sending unit, strainer, gasket or seal, and float arm assembly, making it a complete replacement unit for service on select Ford E-150, E-250, and E-350 Super Duty vans. The turbine-style pump design, 12.0-volt operation, and quick-connect outlet support OE-style fuel delivery and tank-level signal function.
Sparta, distributed by Delphi, is positioned for higher-mileage and earlier model vehicles where fit and performance matter. This part cross-references Carter P76548S and Spectra Premium SP1199 for the same application. Search terms such as Ford E-150 fuel pump hanger assembly, Ford E-250 in-tank fuel pump module, and Ford E-350 Super Duty fuel sender replacement all point to this application family. Part number PN4014 is the reference to use when matching this assembly.
What It Helps Fix
- Hard starting caused by weak or failing in-tank fuel delivery
- Fuel gauge inaccuracies from a worn sending unit
- Engine hesitation from inconsistent fuel pressure
- No-start conditions related to pump failure
- Restricted fuel flow from a clogged or damaged strainer
Installation Notes and Tips
Verify tank configuration, connector style, outlet type, and vehicle year before installation. This assembly uses a female round connector, male terminals, and a quick-connect outlet with a 0.375-inch outside diameter. Mounting hardware and lock ring are not included, so reuse or source the required tank hardware as needed. Confirm the fuel system is depressurized and the tank is safely supported before removing the original module.
Fits 2004-2008 Ford E-150, N/A; Fits 2004-2008 Ford E-250, N/A; Fits 2004-2008 Ford E-350 Super Duty, N/A; Fits 2004-2005 Ford E-150 Club Wagon, N/A; Fits 2004-2005 Ford E-350 Club Wagon, N/A.
Quality Assurance
Sparta fuel system components are backed by Delphi distribution and OE-focused engineering for earlier model and higher-mileage vehicle applications. PN4014 is a standard replacement part built to match the specified fitment and fuel system requirements for the listed Ford vans.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2008 | Ford | E-150 | 5.4L | V8 | — | N/A | — |
| 2008 | Ford | E-250 | 5.4L | V8 | — | N/A | — |
| 2008 | Ford | E-350 Super Duty | 6.8L | V10 | GAS | N/A | — |
| 2007 | Ford | E-150 | 5.4L | V8 | — | N/A | — |
| 2007 | Ford | E-250 | 5.4L | V8 | — | N/A | — |
| 2007 | Ford | E-350 Super Duty | 6.8L | V10 | GAS | N/A | — |
| 2006 | Ford | E-150 | 5.4L | V8 | — | N/A | — |
| 2006 | Ford | E-250 | 5.4L | V8 | — | N/A | — |
| 2006 | Ford | E-350 Super Duty | 6.8L | V10 | — | N/A | — |
| 2005 | Ford | E-150 | 5.4L | V8 | — | N/A | — |
| 2005 | Ford | E-150 Club Wagon | 5.4L | V8 | — | N/A | — |
| 2005 | Ford | E-250 | 5.4L | V8 | GAS | N/A | — |
| 2005 | Ford | E-350 Club Wagon | 6.8L | V10 | — | N/A | — |
| 2005 | Ford | E-350 Super Duty | 6.8L | V10 | — | N/A | — |
| 2004 | Ford | E-150 | 5.4L | V8 | — | N/A | — |
| 2004 | Ford | E-150 Club Wagon | 5.4L | V8 | — | N/A | — |
| 2004 | Ford | E-250 | 5.4L | V8 | GAS | N/A | — |
| 2004 | Ford | E-350 Club Wagon | 5.4L | V8 | GAS | N/A | — |
| 2004 | Ford | E-350 Super Duty | 6.8L | V10 | — | N/A | — |
| No rows match your filter. | |||||||