/live/media/DE/DE_PN4045_FRO.JPG)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Sparta PN4045 Fuel Pump Hanger Assembly
| Brand | Sparta PN4045 |
|---|---|
| Material | Metal |
| Fuel Sending Unit Included | Yes |
| Negative Ground | No |
| Outlet Outside Diameter | 0.375 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Maximum Pressure | 6.5 |
| Terminal Type | Pin |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Grade Type | Standard replacement |
| Connector Shape | Oval |
| Gasket Or Seal Included | Yes |
| Terminal Quantity | 4 |
| Lock Ring Included | Yes |
| Connector Gender | Female |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Inlet Quantity | 1 |
| Outlet Quantity | 2 |
| In Tank or External | In tank |
| Fuel Pump Included | Yes |
| Resistance Ohms Empty | 70.0 |
| Resistance Ohms Full | 10.0 |
| Gasket Or Seal Material | Nitrile rubber |
| Minimum Pressure | 4.5 |
| Internal Or External Strainer | External |
| Pump Design | Turbine |
| Fits | Ford · 4 vehicles |
OE-backed fit. Specific replacement for a cleaner install on the right application.
Complete hanger assembly. Includes pump, sender, seal, lock ring, and strainer in one unit.
Built for fuel delivery. Electric in-tank turbine pump for gas systems.
Cross-references Airtex Fuel Pumps E2096S, Airtex Fuel Pumps E2486 and Carter P74549S for the same application. See all 15.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Hanger Assembly for Ford Ranger
Sparta PN4045 is a specific-fit fuel pump hanger assembly for 1985-1988 Ford Ranger models. Built as a standard replacement for in-tank gasoline fuel systems, it includes the fuel pump, fuel sending unit, float arm, seal, lock ring, and strainer for a complete service solution.
Key Features
- Specific-fit fuel pump hanger assembly for 1985-1988 Ford Ranger
- In-tank electric turbine pump with 12.0-volt operation
- Gas fuel application with 4.5-6.5 pressure range
- Includes fuel sending unit, float arm, seal, lock ring, and strainer
- Metal construction with nitrile rubber gasket/seal material
- Quick-connect outlet design with female connector and pin terminals
- Average flow rating of 29.0 and average current draw of 7.0
Detailed Description
Sparta PN4045 is engineered for higher-mileage and earlier model vehicles, drawing on OE fuel system expertise from Delphi distribution. This fuel pump hanger assembly is built for the 1985-1988 Ford Ranger and is designed as a direct replacement for the original in-tank fuel delivery module. It uses an electric turbine-style pump, includes the fuel sending unit, and provides the components needed to restore fuel delivery and tank level reporting in one service part. This part cross-references Airtex Fuel Pumps E2096S and Carter P74549S for the same application.
Common Problems This Part Can Address
- Hard starting caused by weak or inconsistent fuel pressure
- Engine stalling from fuel delivery interruption
- Incorrect fuel gauge readings from a worn sending unit
- Low fuel flow from a failing in-tank pump
- Fuel system service needs on a Ford Ranger with an aging hanger assembly
Installation Notes and Tips
Verify tank condition, electrical connector condition, and fuel line routing before installation. This assembly uses a quick-connect outlet, female connector, and pin terminals, so confirm the vehicle harness and fuel line ends match the original configuration. Replace the seal and lock ring during service, and inspect the tank strainer area for contamination before returning the vehicle to service. Fits 1985-1988 Ford Ranger, N/A.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for older vehicle applications where fit and fuel system performance matter. PN4045 is a standard replacement fuel pump hanger assembly built for specific-fit service on the Ford Ranger platform.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1988 | Ford | Ranger | Standard Cab Pickup | 2.9L | V6 | N/A | — |
| 1987 | Ford | Ranger | Stripped Chassis | 2.9L | V6 | N/A | — |
| 1986 | Ford | Ranger | Stripped Chassis | 2.9L | V6 | N/A | — |
| 1985 | Ford | Ranger | — | 2.3L | L4 | N/A | — |
| No rows match your filter. | |||||||