/live/media/2L/2L_2B106599_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 2B-106599 Hatch Lift Support
Stabilus 2B-106599 Gas Spring for Honda Odyssey
Stabilus 2B-106599 is a gas spring with a 740 N (166 lb) force rating, built with plastic socket connections on both ends for a direct OE-style fit. It measures 20.886 in. compressed length and 28.563 in. extended length, with a 10 mm rod diameter and 28 mm tube diameter.
Key Features
- Brand: Stabilus
- Part number: 2B-106599
- Force rating: 740 N / 166 lb
- Compressed length: 20.886 in. (530.5 mm)
- Extended length: 28.563 in. (725.5 mm)
- Rod diameter: 0.394 in. (10 mm)
- Tube diameter: 1.102 in. (28 mm)
- Plastic socket rod and tube connections
- Direct replacement style for supported applications
Detailed Description
This Stabilus gas spring is listed for 2005-2010 Honda Odyssey models without power liftgate. It is a fitment-specific replacement for the rear hatch or lift support application on the Honda Odyssey, and the dimensions and socket-style ends should be matched to the original unit before installation. The part number 2B-106599 is also referenced in aftermarket catalogs for the same application, including cross-reference Tuff Support 610285.
Common Replacement Reasons
- Liftgate or hatch no longer stays open
- Rear support drops too quickly when opened
- Weak or inconsistent opening force
- Original gas strut shows wear, leakage, or reduced pressure
- OEM-style replacement needed for a 2005-2010 Honda Odyssey without power liftgate
Installation Notes and Tips
Verify compressed length, extended length, rod diameter, tube diameter, and plastic socket attachment style against the original support before installation. Confirm the vehicle is a 2005-2010 Honda Odyssey without power liftgate, since fitment is application-specific. Support the hatch securely during replacement and compare the original mounting points to the new Stabilus 2B-106599 gas spring before snapping the sockets into place.
Quality Assurance
Stabilus is a recognized OE supplier for gas springs and lift supports, and this part is built to match the listed dimensions and force rating for the specified Honda Odyssey application.
| Brand | Stabilus |
|---|---|
| Part Number | 2B-106599 |
| Y | |
| Y | |
| Body | 1.102 |
| Compressed Length | 20.886 |
| Compressed Length | 530.5 |
| Extended Length | 28.563 |
| Extended Length | 725.5 |
| Force (N) | 740 |
| Force Lbs | 166 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 1.102 |
| Tube Diameter | 28 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Honda | Odyssey | N/A | w/o Power Liftgate |
| 2009 | Honda | Odyssey | N/A | w/o Power Liftgate |
| 2008 | Honda | Odyssey | N/A | w/o Power Liftgate |
| 2007 | Honda | Odyssey | N/A | w/o Power Liftgate |
| 2006 | Honda | Odyssey | N/A | w/o Power Liftgate |
| 2005 | Honda | Odyssey | N/A | w/o Power Liftgate |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.