Stabilus 2B-575025 Hatch Lift Support

Stabilus 2B-575025 Gas Spring for Acura Integra

Stabilus 2B-575025 is a gas spring built for controlled lift and support in OE-style automotive applications. It uses a 229 N (51 lb) force rating, an 810 mm extended length, and a 491 mm compressed length to match the specified Acura Integra fitment.

Fits 1994-2001 Acura Integra, N/A. This Stabilus gas spring is identified by part number 2B-575025 and is cross-referenced with Tuff Support 610117 for the same application.

Key Features

• Force rating: 229 N / 51 lb
• Extended length: 810 mm (31.890 in)
• Compressed length: 491 mm (19.331 in)
• Rod diameter: 8 mm (0.315 in)
• Tube diameter: 18 mm (0.709 in)
• Rod connection: metal blade
• Tube connection: plastic socket
• Rod end attachment diameter: 10 mm (0.394 in)
• Tube end attachment diameter: 10 mm (0.394 in)

Detailed Description

Stabilus 2B-575025 is a direct-fit gas spring for 1994-2001 Acura Integra models listed in the fitment data. The measured lengths, attachment style, and force rating are the key specifications to verify when replacing a worn lift support, hatch support, or similar body panel support on the Acura Integra.

With a metal blade rod connection and plastic socket tube connection, this unit follows the attachment style called out in the product data. The 8 mm rod diameter and 18 mm tube diameter help identify the correct replacement when comparing against the original support. Part number 2B-575025 is also referenced under Stabilus 2B-575025 for catalog matching.

Common Issues This Part Can Address

• Rear hatch or liftgate that drops instead of staying open
• Weak support force when opening a panel
• Slow or uneven lift action
• Support that no longer holds position at full extension
• Replacement need after gas pressure loss or seal wear

Installation Notes and Tips

Confirm the extended length, compressed length, force rating, and end fittings against the original support before installation. Match the metal blade and plastic socket connection points to the vehicle mounting locations on the Acura Integra. Replace supports in pairs only when the vehicle design and service procedure call for it, and verify smooth operation after installation.

Quality Assurance

Stabilus is a recognized OE supplier of gas springs and lift supports, and this part is built to the dimensional and force specifications listed above. Use the confirmed fitment for 1994-2001 Acura Integra, N/A, along with the part number 2B-575025, to verify application before ordering.