OE Quality
60-Day Returns

Stabilus 3B-251468 Hatch Lift Support
Stabilus Gas Strut for Honda Element
This Stabilus gas strut is built for the 2003-2011 Honda Element and is identified by part number 3B-251468. With a 285 N (64 lb) force rating, 580 mm extended length, and 387.5 mm compressed length, it is specified for controlled lift and support in the vehicle’s application.
Key Features
- Fits 2003-2011 Honda Element
- Stabilus part number 3B-251468
- 285 N / 64 lb force rating
- 580 mm extended length and 387.5 mm compressed length
- Plastic socket rod and tube connections
- 8 mm rod diameter and 18 mm tube diameter
- Includes hardware kit reference 663984
Product Details
Stabilus 3B-251468 is an OE-style gas spring assembly with plastic socket connections at both ends for a direct-fit style replacement in the Honda Element. The unit measures 22.835 inches extended and 15.256 inches compressed, with a 0.315 inch rod diameter and 0.709 inch tube diameter. These dimensions and the 285 N output are important for maintaining proper lift support and controlled movement in the intended application. This part cross-references Honda OE number 74820-SCV-A01 for the same application.
Common Problems This Part Can Address
- Rear hatch or liftgate that drops instead of staying open
- Weak or inconsistent opening support
- Hard-to-lift tailgate movement
- Reduced control when opening or closing the supported panel
- Noise or uneven motion from a worn gas strut
Installation Notes and Tips
Verify the existing strut length, end fittings, and force rating before installation. Compare the old unit to Stabilus 3B-251468 to confirm the plastic socket attachment style and overall dimensions match the Honda Element application. Replace only after confirming the mounting points are clean and undamaged, and support the liftgate or panel securely during service.
Quality Assurance
Stabilus is a recognized OE supplier for gas springs and lift support components, and this part is built to match the specified application requirements for the Honda Element.
| Brand | Stabilus |
|---|---|
| Part Number | 3B-251468 |
| Y | |
| Y | |
| Body | 0.709 |
| Compressed Length | 15.256 |
| Compressed Length | 387.5 |
| Extended Length | 22.835 |
| Extended Length | 580 |
| Force (N) | 285 |
| Force Lbs | 64 |
| Hardware Kit | 663984 |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.315 |
| Rod Diameter | 8 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.315 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.709 |
| Tube Diameter | 18 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 9 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2011 | Honda | Element | N/A | |
| 2010 | Honda | Element | N/A | |
| 2009 | Honda | Element | N/A | |
| 2008 | Honda | Element | N/A | |
| 2007 | Honda | Element | N/A | |
| 2006 | Honda | Element | N/A | |
| 2005 | Honda | Element | N/A | |
| 2004 | Honda | Element | N/A | |
| 2003 | Honda | Element | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.