/live/media/2L/2L_3B581958_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 3B-581958 Hatch Lift Support
Stabilus 3B-581958 Gas Spring for Windstar
Stabilus 3B-581958 is a gas spring built for controlled lift support on the 1999-2003 Ford Windstar. With a 679 N (153 lb) force rating, 625 mm extended length, and 374 mm compressed length, it is specified for applications that need smooth opening and steady ????????? of a supported panel or hatch.
Key Features
- Brand: Stabilus
- Part number: 3B-581958
- Force rating: 679 N / 153 lb
- Extended length: 24.606 in (625 mm)
- Compressed length: 14.724 in (374 mm)
- Rod diameter: 0.394 in (10 mm)
- Tube diameter: 1.102 in (28 mm)
- Plastic socket rod and tube connections
- Fits 1999-2003 Ford Windstar
Detailed Description
This Stabilus gas spring is engineered with a 10 mm rod, 28 mm tube, and plastic socket end connections for direct replacement use where the original lift support matches these dimensions. The 3B-581958 part number is also referenced under several OE and aftermarket cross numbers, making it easier to match the correct support for a Ford Windstar liftgate or rear hatch application. If you are searching for a Ford Windstar lift support, rear hatch gas strut, or tailgate strut replacement, this part number is the key identifier to verify before ordering.
Compatible fitment is listed for 1999-2003 Ford Windstar, and the same application is commonly searched by year-specific terms such as 1999 Ford Windstar lift support, 2000 Ford Windstar hatch strut, 2001 Ford Windstar rear gas spring, 2002 Ford Windstar liftgate support, and 2003 Ford Windstar tailgate strut. This part cross-references Focus Auto Parts 84559 and AMS Automotive 4559 for the same application.
What It Helps Address
- Weak or failing lift support that no longer holds the panel open
- Slow, uneven, or heavy opening of the supported hatch or liftgate
- Drooping rear access panel on a Ford Windstar
- Loss of controlled motion when raising or lowering the support point
- Noise or instability caused by a worn gas spring
Installation Notes and Tips
Verify the original compressed length, extended length, rod diameter, tube diameter, and plastic socket attachment style before installation. Compare the existing support to part number 3B-581958 and confirm the vehicle is a 1999-2003 Ford Windstar. Replace only with the correct length and force rating to maintain proper opening effort and closed-position alignment.
Quality Assurance
Stabilus is a recognized OE supplier for gas springs and lift supports, and this part is built to match the listed dimensions and force specification for the intended Windstar application.
| Brand | Stabilus |
|---|---|
| Part Number | 3B-581958 |
| Y | |
| Y | |
| Body | 1.102 |
| Compressed Length | 14.724 |
| Compressed Length | 374 |
| Extended Length | 24.606 |
| Extended Length | 625 |
| Force (N) | 679 |
| Force Lbs | 153 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 1.102 |
| Tube Diameter | 28 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2003 | Ford | Windstar | N/A | |
| 2002 | Ford | Windstar | N/A | |
| 2001 | Ford | Windstar | N/A | |
| 2000 | Ford | Windstar | N/A | |
| 1999 | Ford | Windstar | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.