Stabilus 3B-811205 Hatch Lift Support

Stabilus 3B-811205 Gas Spring Overview

The Stabilus 3B-811205 gas spring is built for the 2004-2008 Chrysler Pacifica and is specified with a 745 N (167 lb) force rating. It uses plastic socket connections at both ends for a direct OE-style replacement on the listed application.

Key Features

• Stabilus part number 3B-811205
• Fits 2004-2008 Chrysler Pacifica
• 745 N / 167 lb force rating
• Extended length: 633 mm (24.921 in)
• Compressed length: 457 mm (17.992 in)
• Rod diameter: 10 mm (0.394 in)
• Tube diameter: 22 mm (0.866 in)
• Plastic socket rod and tube connections

Detailed Description

Use the Stabilus 3B-811205 when replacing a worn gas spring on a Chrysler Pacifica from 2004 through 2008. The unit measures 633 mm extended and 457 mm compressed, with a 10 mm rod and 22 mm tube diameter, giving you the dimensional match needed for the listed vehicle application. If you are searching for a Chrysler Pacifica lift support, hatch support, or OE-style gas strut replacement, this part number 3B-811205 is the direct reference to verify.

This part cross-references AMS Automotive 6154 and Tuff Support 610692 for the same application.

Common Issues It Can Address

• Rear hatch or liftgate that will not stay open
• Weak or slow support when opening the panel
• Dropping hatch movement caused by gas pressure loss
• Uneven or inconsistent opening effort
• Noise or binding from an aging support strut

Installation Notes and Tips

Confirm the vehicle is a 2004-2008 Chrysler Pacifica before ordering. Compare the original strut’s extended length, compressed length, and end fittings to the Stabilus 3B-811205, since the plastic socket connections must match the mounting points on the vehicle. Support the hatch or panel securely before removing the old gas spring, and replace only with the correct side and application listed for your vehicle.

Quality Assurance

Stabilus is a recognized OE supplier for gas springs and lift supports, and this replacement is built to match the listed fitment and dimensional specifications for the Chrysler Pacifica application.