/live/media/2L/2L_3B893660_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 3B-893660 Hatch Lift Support
Stabilus 3B-893660 Gas Spring for Toyota Sienna
The Stabilus 3B-893660 is a gas spring built for controlled lift and support on select Toyota Sienna applications. It uses plastic socket connections at both ends and delivers 565 N (127 lb) of force for consistent opening and closing action.
Key Features
- Stabilus part number 3B-893660
- Fits 2006-2010 Toyota Sienna, Exc. Power Liftgate
- Extended length: 24.528 in. (623 mm)
- Compressed length: 15.787 in. (401 mm)
- Rod diameter: 0.394 in. (10 mm)
- Tube diameter: 0.866 in. (22 mm)
- Force rating: 565 N / 127 lb
- Plastic socket rod and tube connections
Detailed Description
This Stabilus gas spring is specified for 2006-2010 Toyota Sienna models with the note “Exc. Power Liftgate.” The 3B-893660 uses a 10 mm rod, 22 mm tube, and plastic socket attachment points to match the original-style mounting layout on the supported application. If you are replacing a worn lift support on a Toyota Sienna, this part number 3B-893660 provides the measured length and force rating needed for proper panel movement.
This part cross-references AMS Automotive 6140 and TRW TSG229053 for the same application.
What It Is Used For
- Replacing a weak or failed lift support on a Toyota Sienna
- Restoring controlled opening and closing of the supported panel
- Addressing a hatch, liftgate, or rear panel that drops too quickly
- Reducing the effort needed to raise the supported component
- Correcting uneven or inconsistent support force
Installation Notes and Tips
Verify the vehicle is a 2006-2010 Toyota Sienna with the Exc. Power Liftgate note before ordering. Compare the compressed length, extended length, rod diameter, tube diameter, and socket-style ends to the original unit to confirm match. Replace gas springs in a supported position and inspect the mounting points for wear before installation.
Quality Assurance
Stabilus is a recognized OE supplier of gas springs and lift supports, and this 3B-893660 follows the dimensional and force specifications needed for the listed Toyota Sienna fitment.
| Brand | Stabilus |
|---|---|
| Part Number | 3B-893660 |
| Y | |
| Y | |
| Body | 0.866 |
| Compressed Length | 15.787 |
| Compressed Length | 401 |
| Extended Length | 24.528 |
| Extended Length | 623 |
| Force (N) | 565 |
| Force Lbs | 127 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.866 |
| Tube Diameter | 22 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Toyota | Sienna | N/A | Exc.Power Liftgate |
| 2009 | Toyota | Sienna | N/A | Exc.Power Liftgate |
| 2008 | Toyota | Sienna | N/A | Exc.Power Liftgate |
| 2007 | Toyota | Sienna | N/A | Exc.Power Liftgate |
| 2006 | Toyota | Sienna | N/A | Exc.Power Liftgate |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.