/live/media/2L/2L_4B037802_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 4B-037802 Hatch Lift Support
OE-Style Gas Strut for Toyota C-HR
This Stabilus gas strut is built for the 2018-2019 Toyota C-HR and matches the OE-style dimensions and force needed for controlled lift support. Part number 4B-037802 is specified with plastic socket connections and a 105 lb (465 N) force rating for direct replacement use.
Key Features
- Fits 2018-2019 Toyota C-HR, N/A
- Stabilus part number 4B-037802
- Extended length: 20.866 in (530 mm)
- Compressed length: 12.343 in (313.5 mm)
- Force rating: 105 lb / 465 N
- Rod diameter: 0.315 in (8 mm)
- Tube diameter: 0.709 in (18 mm)
- Plastic socket rod and tube connections
Detailed Description
Stabilus 4B-037802 is a gas spring designed for Toyota C-HR applications that require controlled opening and holding force. The unit uses plastic socket attachments at both ends and follows the listed OE-style dimensions, including a 20.866-inch extended length and 12.343-inch compressed length. For shoppers searching for a Toyota C-HR lift support, hatch support, or rear liftgate strut replacement, this part number provides a direct reference point for the correct application.
This part cross-references OE numbers such as 68950-0WF71 and 68960-F4011 for the same application. The Stabilus 4B-037802 is also a relevant search match for 2018 Toyota C-HR and 2019 Toyota C-HR owners needing a replacement gas strut with the correct force and socket-style ends.
Common Problems This Part Can Address
- Liftgate or hatch that will not stay open
- Weak or slow opening action
- Drooping rear support when the vehicle is parked
- Uneven or inconsistent lift assistance
- Noise or reduced damping from a worn gas spring
Installation Notes and Tips
Verify the existing strut length, end fittings, and force rating before installation. Match the plastic socket connections to the vehicle mounting points and confirm the application notes for Japan-built and non-Japan-built Toyota C-HR vehicles, since the fitment listing includes build-date restrictions. Compare the old unit to Stabilus 4B-037802 before removal to confirm orientation and mounting style.
Quality Assurance
Stabilus is a recognized OE supplier for gas springs and lift supports, and this part is specified to the listed dimensions and force rating for the confirmed Toyota C-HR fitment.
| Brand | Stabilus |
|---|---|
| Part Number | 4B-037802 |
| Y | |
| Y | |
| Body | 0.709 |
| Compressed Length | 12.343 |
| Compressed Length | 313.5 |
| Extended Length | 20.866 |
| Extended Length | 530 |
| Force (N) | 465 |
| Force Lbs | 105 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.315 |
| Rod Diameter | 8 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.315 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.709 |
| Tube Diameter | 18 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 2 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2019 | Toyota | C-HR | N/A | Exc. Japan Built Vehicle (From 04/18 to 04/19), Japan Built Vehicle (From 06/18 to 05/19) |
| 2018 | Toyota | C-HR | N/A | Exc. Japan Built Vehicle (From 04/18 to 04/19), Japan Built Vehicle (From 06/18 to 05/19) |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.