/live/media/2L/2L_4B205819_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 4B-205819 Hatch Lift Support
Stabilus 4B-205819 Gas Spring for Mitsubishi Endeavor
The Stabilus 4B-205819 is a gas spring built for controlled lift and support in the 2010-2011 Mitsubishi Endeavor. With a 570 N (128 lb) force rating, plastic socket end connections, and OE-style dimensions, it is a direct replacement choice for restoring smooth opening and holding action.
- Fits 2010-2011 Mitsubishi Endeavor
- 570 N / 128 lb force rating
- Extended length: 20.866 in (530 mm)
- Compressed length: 12.303 in (312.5 mm)
- Rod diameter: 0.394 in (10 mm)
- Tube diameter: 0.866 in (22 mm)
- Plastic socket rod and tube connections
- Stabilus part number 4B-205819
Detailed Product Overview
This Stabilus gas spring is sized for the Mitsubishi Endeavor application listed above and uses the same general OE-style layout expected for lift support service. The 20.866-inch extended length, 12.303-inch compressed length, and 10 mm rod diameter help match the original support geometry, while the 22 mm tube diameter and plastic socket ends support a clean fit at the mounting points. This part cross-references Gates 6832 for the same application.
Common Issues It Can Address
- Rear liftgate or hatch that drops instead of staying open
- Weak or inconsistent opening support
- Slow, uneven, or noisy lift assist operation
- Loss of holding force from a worn gas strut
- Difficulty keeping the panel raised during loading or unloading
Installation Notes and Tips
Verify the existing support’s compressed length, extended length, and end fitting style before installation. Match the plastic socket connections to the vehicle mounting points and confirm the support is oriented the same way as the original part. For best results, replace supports in pairs when both sides show similar wear, and support the liftgate or panel securely before removing the old unit.
Quality Assurance
Stabilus is a recognized OE supplier of gas springs and lift supports, and this part is built to meet the dimensional and force requirements of the listed Mitsubishi Endeavor applications. Part number 4B-205819 is also referenced in aftermarket catalogs for the same fitment.
| Brand | Stabilus |
|---|---|
| Part Number | 4B-205819 |
| Y | |
| Y | |
| Body | 0.866 |
| Compressed Length | 12.303 |
| Compressed Length | 312.5 |
| Extended Length | 20.866 |
| Extended Length | 530 |
| Force (N) | 570 |
| Force Lbs | 128 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.866 |
| Tube Diameter | 22 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 2 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2011 | Mitsubishi | Endeavor | N/A | |
| 2010 | Mitsubishi | Endeavor | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.