/live/media/2L/2L_4B247370_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 4B-247370 Hatch Lift Support
Stabilus 4B-247370 Gas Spring for Jeep Liberty
Stabilus 4B-247370 is a gas spring built for Jeep Liberty liftgate or hatch support applications that require controlled opening and steady hold force. It delivers 680 N (153 lb) of force with a 551 mm extended length and 399.5 mm compressed length for the specified Jeep Liberty fitments.
Key Features
- Brand: Stabilus
- Part number: 4B-247370
- Force rating: 680 N / 153 lb
- Extended length: 551 mm (21.693 in)
- Compressed length: 399.5 mm (15.728 in)
- Rod diameter: 10 mm (0.394 in)
- Tube diameter: 22 mm (0.866 in)
- Plastic socket rod and tube connections
- Direct fit for select Jeep Liberty models
Detailed Description
This Stabilus gas spring is specified for 2009 Jeep Liberty, 2010-2012 Jeep Liberty, and 2013 Jeep Liberty applications. The 2013 Jeep Liberty listing notes a temperature compensating valve for increased hold force in cold weather, which helps maintain consistent lift support in lower temperatures. If you are replacing a worn lift support on a Jeep Liberty, 4B-247370 provides the measured length and force specifications needed for a proper OE-style replacement.
This part cross-references Mopar 57010181AC and TRW TSG214063 for the same application. It is also associated with other aftermarket interchange numbers including 819-6896 and 86381.
What It Is Used For
- Restoring liftgate or hatch support on a Jeep Liberty
- Replacing a weak strut that no longer holds the panel open
- Correcting slow, uneven, or uncontrolled opening action
- Addressing reduced hold force in cold-weather operation
- Replacing a gas spring with matching length and force specifications
Installation Notes and Tips
Verify the existing strut’s extended length, compressed length, and end fittings before installation. This part uses plastic socket connections at both ends, so confirm the attachment style matches the vehicle mounting points. For best results, replace gas springs in pairs when both sides show similar wear, and support the liftgate or hatch securely before removing the old unit.
Quality Assurance
Stabilus is a recognized OE supplier of gas springs and lift supports, and this part is built to match the listed Jeep Liberty applications and dimensional requirements.
| Brand | Stabilus |
|---|---|
| Part Number | 4B-247370 |
| Y | |
| Y | |
| Body | 0.866 |
| Compressed Length | 15.728 |
| Compressed Length | 399.5 |
| Extended Length | 21.693 |
| Extended Length | 551 |
| Force (N) | 680 |
| Force Lbs | 153 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.866 |
| Tube Diameter | 22 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 5 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2013 | Jeep | Liberty | N/A | With Temperature Compensating Valve for increased hold force in cold weather. |
| 2012 | Jeep | Liberty | N/A | |
| 2011 | Jeep | Liberty | N/A | |
| 2010 | Jeep | Liberty | N/A | |
| 2009 | Jeep | Liberty | N/A | From 09/29/2008 |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.