OE Quality
60-Day Returns

Stabilus 4B-295207 Hatch Lift Support - Left
Stabilus 4B-295207 Lift Support for Jeep Grand Cherokee
Restore controlled liftgate or hatch movement with this Stabilus gas spring, part number 4B-295207. It is built for the left side on 1993-1998 Jeep Grand Cherokee applications and uses OE-style attachment points for a direct replacement fit.
Key Features
- Brand: Stabilus
- Part number: 4B-295207
- Force rating: 810 N / 182 lb
- Compressed length: 12.52 in (318 mm)
- Extended length: 18.583 in (472 mm)
- Rod diameter: 0.394 in (10 mm)
- Tube diameter: 0.866 in
- Rod connection: metal socket
- Tube connection: heim joint with bracket
- Fits the left side on Jeep Grand Cherokee models from 1993-1998
Detailed Description
The Stabilus 4B-295207 gas strut is specified for 1993-1998 Jeep Grand Cherokee left-side applications. With an 810 N force rating, 12.52-inch compressed length, and 18.583-inch extended length, it is sized to match the original support geometry and movement range for the vehicle. The metal socket rod end and heim joint with bracket tube end provide the connection style needed for proper mounting on the Grand Cherokee.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are searching for a Jeep Grand Cherokee lift support, hatch strut, or rear glass support by part number 4B-295207, this Stabilus unit matches the listed left-side fitment.
Common Issues This Part Addresses
- Liftgate or hatch that will not stay open
- Weak or slow-moving rear support
- Drooping tailgate or rear glass
- Uneven or inconsistent opening effort
- Loss of controlled closing and opening motion
Installation Notes and Tips
Verify the vehicle year, model, and left-side position before ordering. Compare the compressed length, extended length, and end fittings to the original support to confirm match. Replace supports in a stable, supported position so the liftgate or hatch does not drop during service. For best results, inspect the mounting points and surrounding brackets for wear before installing the new strut.
Quality Assurance
Stabilus is a recognized OE supplier of gas springs and lift supports, and this part is built to the listed dimensional and force specifications for the confirmed Jeep Grand Cherokee application.
| Brand | Stabilus |
|---|---|
| Part Number | 4B-295207 |
| Y | |
| Y | |
| Body | 0.866 |
| Compressed Length | 12.52 |
| Compressed Length | 318 |
| Extended Length | 18.583 |
| Extended Length | 472 |
| Force (N) | 810 |
| Force Lbs | 182 |
| Hardware Kit | NO |
| Rod Connection | METAL SOCKET |
| Rod Dia (IN) | 0.394 |
| Rod Diameter | 10 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.394 |
| Shaft Connection | METAL SOCKET |
| Tube Connection | HEIM JOINT WITH BRACKET |
| Tube Dia (IN) | 0.866 |
| Tube Diameter | 22 |
This part fits 6 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1998 | Jeep | Grand Cherokee | Left | |
| 1997 | Jeep | Grand Cherokee | Left | |
| 1996 | Jeep | Grand Cherokee | Left | |
| 1995 | Jeep | Grand Cherokee | Left | |
| 1994 | Jeep | Grand Cherokee | Left | |
| 1993 | Jeep | Grand Cherokee | Left |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.