/live/media/2L/2L_4B9916VP_Fro.jpg)
Stabilus 4B-9916VP Back Glass Lift Support
| Brand | Stabilus 4B-9916VP |
|---|---|
| Y | |
| Y | |
| Body | 0.709 |
| Compressed Length | 10.276 |
| Compressed Length | 261 |
| Extended Length | 17.047 |
| Extended Length | 433 |
| Force (N) | 130 |
| Force Lbs | 29 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.315 |
| Rod Diameter | 8 |
| Rod End Attachment Dia (IN) | 0.394 |
| Rod End Attachment Dia (MM) | 10 |
| Shaft | 0.315 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.709 |
| Tube Diameter | 18 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
| Fits | Mitsubishi · 6 vehicles |
OE direct replacement. Restores smooth glass lift support operation with a precise fit.
Plastic socket connections. Simple attachment points help make installation straightforward.
Gas-charged support. Provides 29 lb of force for controlled opening and closing.
Cross-references AMS Automotive 4193, Dayco 84193 and Stabilus 4B-9916VP for the same application. See all 13.
Back Glass Lift Support for Mitsubishi Endeavor
This Stabilus back glass lift support is built for the rear glass on 2004-2009 Mitsubishi Endeavor models. It uses plastic socket connections and OE-style dimensions to support smooth opening and controlled holding of the back glass.
- Brand: Stabilus
- Part number: 4B-9916VP
- Back glass lift support for rear glass applications
- Compressed length: 10.276 in. / 261 mm
- Extended length: 17.047 in. / 433 mm
- Force rating: 130 N / 29 lb
- Rod diameter: 0.315 in. / 8 mm
- Tube diameter: 0.709 in. / 18 mm
- Plastic socket rod and tube connections
Fitment Details
Fits 2004-2009 Mitsubishi Endeavor, N/A.
This part cross-references Dayco 84193 for the same application.
Product Overview
The Stabilus 4B-9916VP is a rear glass lift support engineered to match the length, force, and connection style used on the Mitsubishi Endeavor back glass. With a 130 N force rating and plastic socket ends, it is specified for controlled lift and hold performance on the rear glass panel. The compact compressed length and 17.047-inch extended length help it align with the original mounting geometry on 2004-2009 Mitsubishi Endeavor vehicles. If you are replacing a worn lift support on a Mitsubishi Endeavor, 4B-9916VP provides a direct-fit service part for the back glass area.
Common Issues This Part Can Address
- Back glass that drops instead of staying open
- Weak or inconsistent lift support pressure
- Rear glass that opens slowly or feels heavy
- Noise or binding from a worn lift support
- Loss of controlled support at the rear hatch glass
Installation Notes and Tips
Verify the rod and tube socket style before installation and compare the compressed and extended lengths to the removed part. Support the back glass securely during replacement, and confirm the mounting points are fully seated after installation. For best results, replace lift supports in matched condition when the opposite side shows similar wear.
Quality Assurance
Stabilus is a recognized OE supplier of gas springs and lift supports, and this part is built to meet the dimensional and force requirements listed for the application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Mitsubishi | Endeavor | N/A | — |
| 2008 | Mitsubishi | Endeavor | N/A | — |
| 2007 | Mitsubishi | Endeavor | N/A | — |
| 2006 | Mitsubishi | Endeavor | N/A | — |
| 2005 | Mitsubishi | Endeavor | N/A | — |
| 2004 | Mitsubishi | Endeavor | N/A | — |
| No rows match your filter. | ||||