/live/media/2L/2L_4D023967_Fro.jpg)
OE Quality
60-Day Returns
Stabilus 4D-023967 Hatch Lift Support
Stabilus 4D-023967 Gas Spring for Audi Lift Support Service
The Stabilus 4D-023967 is a gas spring built for specific Audi rear hatch and flap applications. With a 690 N (155 lb) force rating, 500 mm extended length, and plastic socket connections, it supports controlled opening and closing action for the listed Audi A6 Quattro, S6, and Allroad Quattro applications.
Key Features
- Brand: Stabilus
- Part number: 4D-023967
- Force rating: 690 N / 155 lb
- Extended length: 500 mm (19.685 in)
- Compressed length: 305 mm (12.008 in)
- Rod diameter: 8 mm (0.315 in)
- Tube diameter: 22 mm (0.866 in)
- Plastic socket rod and tube connections
- OE-style dimensions for listed Audi fitments
Detailed Description
This Stabilus gas spring is specified for Audi lift support service where controlled motion and consistent holding force are required. The 4D-023967 uses plastic socket attachments and OE-matched dimensions to service the rear hatch or flap on 1999-2004 Audi A6 Quattro, 2001 Audi Allroad Quattro, and 2002-2003 Audi S6 applications. It also cross-references AMS Automotive 6367 and Atlantic Automotive Engineering 4280 for the same application.
Compatible With: Fits 1999-2000 Audi A6 Quattro, N/A; Fits 2001 Audi A6 Quattro, N/A, w/ Reduced Flap Opening Angle; Fits 2001 Audi Allroad Quattro, N/A; Fits 2002-2004 Audi A6 Quattro, N/A; Fits 2002-2003 Audi S6, N/A.
What It Helps Address
- Weak or failing hatch support
- Hatch or flap that drops too quickly
- Uneven opening effort
- Loss of holding force in the open position
- Noisy or inconsistent lift support movement
Installation Notes and Tips
Verify the rod and tube socket style, compressed length, extended length, and force rating before installation. Compare the existing support to the 4D-023967 and confirm the vehicle-specific notes, including the 2001 Audi A6 Quattro reduced flap opening angle application and the 1999-2000 Audi A6 Quattro special glass exclusion. Replace only with the correct side-agnostic support specified for the vehicle configuration.
Quality Assurance
Stabilus is an established OE supplier of gas springs and lift supports, and this part is built to match the listed dimensions and application requirements for the specified Audi models.
| Brand | Stabilus |
|---|---|
| Part Number | 4D-023967 |
| Y | |
| Y | |
| Body | 0.866 |
| Compressed Length | 12.008 |
| Compressed Length | 305 |
| Extended Length | 19.685 |
| Extended Length | 500 |
| Force (N) | 690 |
| Force Lbs | 155 |
| Hardware Kit | NO |
| Rod Connection | PLASTIC SOCKET |
| Rod Dia (IN) | 0.315 |
| Rod Diameter | 8 |
| Rod End Attachment Dia (IN) | 0.512 |
| Rod End Attachment Dia (MM) | 13 |
| Shaft | 0.315 |
| Shaft Connection | PLASTIC SOCKET |
| Tube Connection | PLASTIC SOCKET |
| Tube Dia (IN) | 0.866 |
| Tube Diameter | 22 |
| Tube End Attach Dia (IN) | 0.394 |
| Tube End Attach Dia (mm) | 10 |
This part fits 9 vehicles. Search below:
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2004 | Audi | A6 Quattro | N/A | ||
| 2003 | Audi | A6 Quattro | N/A | ||
| 2003 | Audi | S6 | N/A | ||
| 2002 | Audi | A6 Quattro | N/A | ||
| 2002 | Audi | S6 | N/A | ||
| 2001 | Audi | A6 Quattro | Wagon | N/A | w/ Reduced Flap Opening Angle |
| 2001 | Audi | Allroad Quattro | N/A | ||
| 2000 | Audi | A6 Quattro | N/A | Exc.Vehicles With Special Glass | |
| 1999 | Audi | A6 Quattro | N/A | Exc.Vehicles With Special Glass |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.