/live/media/SW/SW_CPBK820_Fro.jpg)
Standard Ignition CPBK820 Direct Ignition Coil Boot Kit
| Brand | Standard Ignition CPBK820 |
|---|---|
| Boot Configuration | Straight |
| Content | Includes spring |
| O.E.M. Replacement | Yes |
| Part Material | Silicone |
| Per Vehicle Requirement | 6 |
| Fits | Subaru · 26 vehicles |
OEM replacement. Direct-service ignition boot kit built for original-style fit and function.
Silicone boot. Heat-resistant material helps maintain electrical insulation at the coil connection.
Includes spring. Internal spring supports consistent contact inside the boot assembly.
Cross-references Standard Ignition CPBK820 for the same application. See all 1.
Ignition Coil Boot Kit Overview
Standard Ignition CPBK820 is a direct ignition coil boot kit built for Subaru applications that call for an OEM replacement boot assembly. It uses a straight boot configuration and silicone construction for dependable coil-to-plug connection service. This part number, CPBK820, is listed for Subaru Tribeca, Legacy, Outback, and B9 Tribeca coverage.
Key Features
- OEM replacement design for direct service use
- Straight boot configuration for a clean coil connection
- Silicone boot material for heat-resistant electrical insulation
- Includes spring for proper internal contact support
- Standard Ignition CPBK820 for Subaru ignition service
Detailed Description
CPBK820 is a Standard Ignition direct ignition coil boot kit intended for ignition service where the boot and spring are replaced as part of coil maintenance. The silicone boot material helps maintain electrical isolation at the coil interface, while the straight configuration matches applications that use a direct boot layout. For Subaru Legacy, Subaru Outback, and Subaru Tribeca service, CPBK820 provides an OEM replacement solution that follows the original-style boot design. The part number CPBK820 is also cross-referenced to Standard Ignition CPBK820 for the same application.
What It Helps Address
- Cracked or deteriorated ignition coil boot material
- Weak internal spring contact at the coil connection
- Misfire concerns related to worn boot insulation
- Electrical leakage at the ignition coil interface
- Service needs on Subaru ignition coil boot assemblies
Installation Notes and Tips
Verify the boot style and application before installation. Match the straight configuration and OEM replacement design to the original part layout on the vehicle. Inspect the coil and spark plug connection points for wear or contamination during service, and replace damaged components as needed to restore proper ignition contact.
Quality Assurance
Standard Ignition identifies CPBK820 as an OEM replacement ignition boot kit. Confirm fitment against the listed Subaru applications before ordering.
| Year | Make | Model | Liters | Cylinders | Notes |
|---|---|---|---|---|---|
| 2014 | Subaru | Tribeca | 3.6L | H6 | — |
| 2013 | Subaru | Tribeca | 3.6L | H6 | — |
| 2012 | Subaru | Legacy | 3.6L | H6 | — |
| 2012 | Subaru | Outback | 3.6L | H6 | — |
| 2012 | Subaru | Tribeca | 3.6L | H6 | — |
| 2011 | Subaru | Legacy | 3.6L | H6 | — |
| 2011 | Subaru | Outback | 3.6L | H6 | — |
| 2011 | Subaru | Tribeca | 3.6L | H6 | — |
| 2010 | Subaru | Legacy | 3.6L | H6 | — |
| 2010 | Subaru | Outback | 3.6L | H6 | — |
| 2010 | Subaru | Tribeca | 3.6L | H6 | — |
| 2009 | Subaru | Legacy | 3.0L | H6 | — |
| 2009 | Subaru | Outback | 3.0L | H6 | — |
| 2009 | Subaru | Tribeca | 3.6L | H6 | — |
| 2008 | Subaru | Legacy | 3.0L | H6 | — |
| 2008 | Subaru | Outback | 3.0L | H6 | — |
| 2008 | Subaru | Tribeca | 3.6L | H6 | — |
| 2007 | Subaru | B9 Tribeca | 3.0L | H6 | — |
| 2007 | Subaru | Outback | 3.0L | H6 | — |
| 2006 | Subaru | B9 Tribeca | 3.0L | H6 | — |
| 2006 | Subaru | Outback | 3.0L | H6 | — |
| 2005 | Subaru | Outback | 3.0L | H6 | — |
| 2004 | Subaru | Outback | 3.0L | H6 | — |
| 2003 | Subaru | Outback | 3.0L | H6 | — |
| 2002 | Subaru | Outback | 3.0L | H6 | — |
| 2001 | Subaru | Outback | 3.0L | H6 | — |
| No rows match your filter. | |||||