Standard Ignition LDP68 Evaporative Emissions System Leak Detection Pump

Evaporative Leak Detection Pump for Subaru Tribeca

Standard Ignition LDP68 is an evaporative emissions system leak detection pump built for vehicles that need accurate EVAP system pressure monitoring. It fits 2008-2014 Subaru Tribeca applications and uses a female connector with one connector interface, two hose connections, and a 7-pin male terminal layout.

Key Features

• Evaporative emissions system leak detection pump for EVAP diagnostics
• Fits 2008-2014 Subaru Tribeca, N/A
• Female connector design with 1 connector and 7 male pin terminals
• Two hose connector ports for EVAP routing
• Standard Ignition LDP68 replacement part number

Detailed Description

The Standard Ignition LDP68 is used in the evaporative emissions control system to help monitor for fuel vapor leaks and maintain proper EVAP system operation. For Subaru Tribeca models, this pump supports the leak-detection function that the vehicle’s onboard diagnostics rely on when checking the sealed fuel vapor system. This part cross-references 2-71068 and 42084XA02A for the same application. Standard Ignition LDP68 is also referenced under interchange part numbers VDP68 and LDPB10040.

What It Helps Address

• EVAP leak codes related to fuel vapor system pressure loss
• Check engine light concerns tied to evaporative emissions faults
• Failed emissions inspection results caused by EVAP monitor issues
• Inconsistent leak detection pump operation in Subaru Tribeca models
• Fuel vapor containment problems within the evaporative system

Installation Notes and Tips

Verify connector style, terminal count, and hose connection layout before installation. Confirm the vehicle application as Fits 2008-2014 Subaru Tribeca, N/A, and compare the original pump configuration to the LDP68 before replacement. After installation, clear diagnostic trouble codes and complete the EVAP readiness drive cycle as required by the vehicle.

Quality Assurance

Standard Ignition supplies replacement electrical and emissions components for service applications, and the LDP68 is built to match the specified connector and terminal configuration for the listed Subaru Tribeca fitment.