/live/media/SI/SI_SK141_Fro.jpg)
OE Quality
60-Day Returns
Standard Ignition SK141 Fuel Injector Seal Kit
Fuel Injector Seal Kit for Reliable Sealing
Standard Ignition SK141 is a fuel injector seal kit built for proper sealing between the fuel injector and fuel rail. It uses high-temperature Viton O-rings with oil- and fuel-resistant construction to help maintain a secure seal during extreme engine heat and demanding operation.
For technicians servicing fuel injector seal replacement on vehicles such as Honda Civic and Toyota Corolla applications, SK141 provides the sealing components needed to restore injector-to-rail integrity. The SK141 fuel injector seal kit is quality-tested for durability and consistent fit.
Key Features
- High-temp Viton O-rings for sealing in extreme heat conditions
- Oil- and fuel-resistant material helps resist premature breakdown
- Designed to match injector and fuel rail mating surfaces
- MFI seal type for fuel injector service applications
- Stainless steel color/finish
- Fits injector service applications that require proper O-ring sealing and fit
Detailed Product Overview
This Standard Ignition fuel injector seal kit is engineered around the sealing surfaces that matter most in injector service. The O-rings are sized for a precise interface at the fuel injector and fuel rail, helping maintain fuel system sealing under heat, vibration, and exposure to fuel and oil. SK141 is a practical choice when replacing worn injector seals during maintenance or repair on fuel-injected vehicles, including Honda Civic and Toyota Corolla service work.
This part cross-references 2-12397 and 800-93029 for the same application.
What It Helps Fix
- Fuel odor caused by leaking injector seals
- Hard starting from loss of fuel rail pressure
- Rough idle related to vacuum or fuel seepage at the injector
- Visible fuel dampness around injector-to-rail sealing points
- Seal deterioration from heat, fuel exposure, or age
Installation Notes and Tips
Inspect the injector and fuel rail sealing surfaces before installation. Clean all mating areas thoroughly, and replace damaged or flattened O-rings before reassembly. Lightly lubricate the seals with clean engine oil or approved fuel-system lubricant during installation to reduce pinching and help the injector seat correctly. Verify proper seating after installation and check for leaks during initial startup.
Quality Assurance
Standard Ignition manufactures this kit with high-temperature Viton material and fuel- and oil-resistant construction, then quality-tests the seals for longevity during demanding vehicle operation. Part number SK141 is built to support consistent injector sealing performance in service applications.
| Brand | Standard Ignition |
|---|---|
| Part Number | SK141 |
| Assorted Sizes | No |
| Color/Finish | Silver |
| Hardware Included | No |
| Injectors Covered per Kit | 6 |
| Kit/Set Contents | Yes |
| Material | Stainless steel |
| Nozzle Seal Included | No |
| Number Of O-Rings | 6 |
| O-Ring/Seal 1 Inside Diameter (mm) | 7.62 |
| O-Ring/Seal 1 Outside Diameter (in | 14.224 |
| O-Ring/Seal 1 Thickness (mm) | 1.27 |
| O-Ring/Seal 2 Inside Diameter (mm) | 7.62 |
| O-Ring/Seal 2 Outside Diameter (mm | 14.224 |
| O-Ring/Seal 2 Thickness (in) | 1.27 |
| O-Ring/Seal 3 Inside Diameter (mm) | 7.62 |
| O-Ring/Seal 3 Outside Diameter (mm | 14.224 |
| O-Ring/Seal 3 Thickness (mm) | 1.27 |
| O-Ring/Seal 4 Inside Diameter (mm) | 7.62 |
| O-Ring/Seal 4 Outside Diameter (mm | 14.224 |
| O-Ring/Seal 4 Thickness (mm) | 1.27 |
| Pintle Cap Included | No |
| Seal Type | Mfi |
| Upper Intake Manifold Gaskets Incl | No |
This part fits 0 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.