Standard Ignition V207 PCV Valve

PCV Valve for Jeep and GM Applications

The Standard Ignition V207 is a push-on PCV valve built for crankcase ventilation service on a range of Jeep, Buick, Chevrolet, Oldsmobile, and Pontiac vehicles. It uses an angled nipple with a 10 mm hose connection and no electrical connector, making it a direct mechanical replacement for the listed applications.

Standard Ignition applies manufacturing control from component selection through final assembly to help address common original-equipment failure points. The V207 is a practical replacement for drivers servicing emissions-related crankcase ventilation on vehicles such as the Jeep Cherokee, Wrangler, and CJ-series models.

Key Features

• Part number V207 PCV valve
• Push-on attachment method for straightforward hose connection
• Angled nipple orientation
• 1 hose connector with 10 mm hose size
• No connector gender; valve-only contents
• Emission control component for crankcase ventilation service

Detailed Description

Standard Ignition V207 is an emission control PCV valve designed for vehicles that rely on a mechanical crankcase ventilation valve to regulate vapors and maintain proper engine breathing. It fits a broad range of applications, including 1984-1993 Jeep Cherokee, 1987-1993 Jeep Wrangler, 1986-1992 Jeep Comanche, 1984-1987 Jeep Wagoneer, 1980-1986 Jeep CJ7, and 1981-1986 Jeep Scrambler. It also covers select Buick, Chevrolet, Oldsmobile, and Pontiac models from the late 1970s through early 1990s.

This part cross-references Gates 78132 and Febi-Bilstein 28149 for the same application. The V207 is a useful OE-style replacement when servicing a Jeep Cherokee PCV valve, Jeep Wrangler crankcase ventilation system, or a Jeep CJ7 emissions repair.

What It Helps Fix

• Rough idle caused by a sticking or restricted PCV valve
• Excess crankcase pressure and oil vapor buildup
• Oil leaks related to poor crankcase ventilation
• Failed emissions inspection tied to PCV system issues
• Hose connection problems at the valve due to worn fittings

Installation Notes and Tips

Verify hose size and nipple orientation before installation. This valve uses a push-on connection with a 10 mm hose size and an angled nipple, so the hose routing should match the original layout. Confirm the vehicle’s emissions configuration, since some listed fitments apply only to Federal or California emissions packages.

For best results, inspect the PCV hose and surrounding crankcase ventilation components for cracks, soft spots, or blockage before installing the new valve. Match the part number V207 to the original application and confirm fitment by year, make, model, and emissions notes.

Quality Assurance

Standard Ignition states that its emission components are manufactured under complete quality control from componentry through finished product. The brand also notes that its designs are developed to address known original-equipment failure issues.