/live/media/SI/SI_V330_Fro.jpg)
Standard Ignition V330 PCV Valve
| Brand | Standard Ignition V330 |
|---|---|
| Connector Gender | No Connector |
| Contents | Valve |
| Hose Size - Inches | 3/8 |
| Hose Size - mm | 10 mm |
| Nipple Orientation | Angled |
| Fits | Toyota · 8 vehicles |
Push-on fitment. Installs with a simple push-on connection.
Angled nipple design. Helps route crankcase ventilation hoses cleanly.
Plastic construction. Lightweight valve body for dependable service.
Cross-references Standard Ignition V330, 2-9405 and 1220410040 for the same application. See all 4.
Standard Ignition V330 PCV Valve Overview
The Standard Ignition V330 is a replacement PCV valve for crankcase ventilation service on select Toyota applications. It uses a push-on attachment method, a plastic body, and an angled nipple layout with two hose connections for straightforward routing in the engine bay.
Compatible With 1992-1996 Toyota Paseo and 1995-1996 Toyota Tercel applications, this PCV valve is also listed for 1998-1999 Toyota Paseo vehicles with ignition knock (detonation) sensor notes and 1995 Toyota Paseo models equipped with California emissions. The V330 part number is also referenced as 2-9405, 1220410040, and PCV405 for the same application.
Key Features
- Standard Ignition V330 PCV valve for crankcase ventilation service
- Push-on attachment method for direct hose connection
- Plastic construction with black and brown finish
- Angled nipple orientation for routing flexibility
- Two hose connectors with 3/8 in. / 10 mm hose size
- No cap, gasket, connector, or mounting bracket included
Detailed Description
The Standard Ignition V330 is built as a direct replacement PCV valve for vehicles that use a push-on, dual-hose configuration. Its inlet and outlet dimensions, along with the angled nipple design, support proper crankcase ventilation routing in the specified Toyota Paseo and Toyota Tercel applications. If you are replacing a worn PCV valve on a Toyota Paseo or Toyota Tercel, the V330 provides the correct form factor for the listed fitments.
This part cross-references 2-9405 and PCV405 for the same application. Use the V330 part number when verifying catalog listings for Toyota Paseo and Toyota Tercel crankcase ventilation service.
What It Helps Address
- Rough idle caused by a restricted PCV valve
- Excess crankcase pressure from poor ventilation
- Oil vapor buildup in the crankcase ventilation system
- Vacuum irregularities related to a sticking valve
- Emissions-related drivability concerns tied to PCV wear
Installation Notes and Tips
Confirm hose size before installation: this valve uses 3/8 in. / 10 mm hose connections. Verify the push-on fitment, angled nipple orientation, and vehicle emissions configuration before replacement, especially on 1995 Toyota Paseo models with California emissions notes. Inspect the connected hoses for cracks, hardening, or oil saturation before installing the new valve.
Quality Assurance
Standard Ignition supplies this PCV valve as an OE-style replacement part for the listed Toyota applications. The V330 is built to match the specified connection style and dimensions for proper crankcase ventilation service.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1999 | Toyota | Paseo | — | — | N/A | Ignition Knock (Detonation) Sensor |
| 1998 | Toyota | Paseo | — | — | N/A | Ignition Knock (Detonation) Sensor |
| 1996 | Toyota | Tercel | — | — | N/A | — |
| 1995 | Toyota | Paseo | 1.5L | L4 | N/A | Fits vehicles equipped with California emissions. |
| 1995 | Toyota | Tercel | — | — | N/A | — |
| 1994 | Toyota | Paseo | 1.5L | L4 | N/A | — |
| 1993 | Toyota | Paseo | 1.5L | L4 | N/A | — |
| 1992 | Toyota | Paseo | 1.5L | L4 | N/A | — |
| No rows match your filter. | ||||||