/live/media/SI/SI_VG50_Fro.jpg)
Standard Ignition VG50 EGR Valve Gasket
| Brand | Standard Ignition VG50 |
|---|---|
| Contents | 1 Gasket |
| Fits | Toyota · 25 vehicles |
Metal construction. Provides a durable sealing surface for emission control applications.
Three-bolt design. Matches the gasket’s mounting pattern for a secure seal.
Single-port gasket. Built for a precise fit at the valve connection.
Cross-references Standard Ignition VG50, 2-2602 and 2562738010 for the same application. See all 4.
Standard Ignition VG50 EGR Valve Gasket
The Standard Ignition VG50 is a metal exhaust gas recirculation (EGR) valve gasket made for specific Toyota applications. It provides the sealing surface needed between the EGR valve and mounting point to help maintain proper exhaust flow control and reduce leakage at the joint.
- Metal gasket construction for EGR valve sealing
- Inner diameter: 0.82 in. / 21.07 mm
- Overall length: 2.54 in. / 64.516 mm
- Overall width: 2.26 in. / 57.404 mm
- Thickness: 1/64 in. / 0.51 mm
- Three bolt holes and one port opening
- Direct replacement for Toyota EGR valve mounting applications
Fitment Coverage
- Fits 1993-1995 Toyota 4Runner, N/A
- Fits 1990 Toyota 4Runner, N/A
- Fits 1984-1988 Toyota 4Runner, N/A
- Fits 1983-1990 Toyota Pickup, N/A
- Fits 1985 Toyota Celica, N/A
- Fits 1971-1977 Toyota Celica, N/A, EGR Valve Mounting Gasket
Detailed Description
Standard Ignition VG50 is an EGR valve gasket built for Toyota emissions service work where a precise seal is required at the valve mounting surface. The metal construction and thin profile help it seat cleanly against the mating surfaces, while the three-bolt pattern and single-port layout match the listed applications. This part number VG50 is used across Toyota 4Runner, Toyota Pickup, and Toyota Celica fitments, including 1971-1977 Toyota Celica EGR valve mounting gasket applications.
This part cross-references 2-2602 and EVG99 for the same application.
What It Helps Address
- Exhaust leakage at the EGR valve mounting flange
- Failed emissions sealing at the valve-to-manifold joint
- Rough idle or drivability concerns tied to EGR sealing loss
- Vacuum or exhaust flow disruption caused by a worn gasket surface
- Service replacement during EGR valve repair on Toyota 4Runner, Pickup, or Celica models
Installation Notes and Tips
Inspect the EGR valve and mating surfaces before installation. Remove carbon buildup, check for warpage or pitting, and confirm the bolt pattern and port alignment match the original part. Use the gasket on the correct mounting surface for the listed Toyota applications and tighten fasteners evenly to maintain a uniform seal.
Quality Assurance
Standard Ignition supplies emission control sealing components for service replacement use. VG50 is built to match the listed dimensions and application-specific fitment for Toyota EGR valve mounting locations.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1995 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1994 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1993 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1990 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1990 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1989 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1988 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1988 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1987 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1987 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1986 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1986 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1985 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1985 | Toyota | Celica | — | — | — | N/A | — |
| 1985 | Toyota | Pickup | 2.4L | L4 | — | N/A | — |
| 1984 | Toyota | 4Runner | 2.4L | L4 | — | N/A | — |
| 1984 | Toyota | Pickup | — | — | GAS | N/A | — |
| 1983 | Toyota | Pickup | — | — | — | N/A | — |
| 1977 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1976 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1975 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1974 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1973 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1972 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| 1971 | Toyota | Celica | — | — | — | N/A | EGR Valve Mounting Gasket |
| No rows match your filter. | |||||||