Stoptech 127.40065R Disc Brake Rotor - Rear Right

StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors Overview

The StopTech Sport Cross-Drilled & Slotted Disc Brake Rotor (Part Number 127.40065R) is engineered for Honda Odyssey models requiring reliable braking performance. Designed with a solid rotor construction and a coated hat finish, this rotor balances durability and heat dissipation for consistent stopping power.

• Compatible with Honda Odyssey vehicles
• Solid disc brake rotor with cross-drilled and slotted surface
• Coated hat finish for corrosion resistance
• Outside diameter: 312.8 mm (12.315 inches)
• Nominal thickness: 11.0 mm (0.433 inches)
• Discard thickness: 9.0 mm (0.354 inches)
• Overall height: 63.6 mm (2.504 inches)
• 5 lug holes with 14.6 mm diameter and 120 mm bolt circle diameter
• Center hole diameter: 70.1 mm (2.760 inches)
• Weight approximately 5.91 kg (13 lbs)

About the StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors Line

The StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors line is designed to improve brake pad bite and heat dissipation through precision-machined slots and drilled holes. This design helps reduce brake fade and maintain consistent braking performance under demanding conditions. The solid rotor construction paired with a coated hat finish enhances rotor longevity and resistance to corrosion, making it suitable for daily driving and moderate performance use.

Product Details and Specifications

This StopTech rotor features a solid disc design with a cross-drilled and slotted surface type, which aids in venting gases and debris from the brake pad interface. The rotor’s nominal thickness is 11.0 mm, with a discard thickness of 9.0 mm, indicating when replacement is necessary. The coated hat finish protects the rotor’s central mounting area from rust and corrosion. It includes five lug holes sized at 14.6 mm diameter on a 120 mm bolt circle, compatible with the Honda Odyssey’s wheel hub. The overall height of 63.6 mm and center hole diameter of 70.1 mm ensure proper fitment and alignment during installation.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Honda Odyssey models
• Improves brake pad contact and reduces brake fade during extended use
• Helps eliminate brake noise caused by glazing or uneven rotor surfaces
• Addresses corrosion issues on rotor hats with coated finish
• Enhances heat dissipation to prevent premature brake component wear

Installation Notes and Tips

• Ensure compatibility with Honda Odyssey model year and specifications before installation
• Inspect brake pads and replace if worn to optimize rotor performance
• Clean mounting surfaces and hub to prevent rotor runout
• Torque lug nuts to manufacturer specifications to avoid rotor distortion
• Check rotor thickness regularly and replace when below discard thickness

Quality Assurance and Warranty

StopTech disc brake rotors are manufactured to meet or exceed OEM standards for fit, form, and function. The coated hat finish provides additional corrosion resistance to extend rotor life. While specific warranty details are not provided here, StopTech products typically come with a limited warranty against defects in materials and workmanship. Always refer to the product packaging or manufacturer documentation for exact warranty terms.