Stoptech 127.61062R Disc Brake Rotor - Rear Right

StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors Overview

The StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors (Part Number 127.61062R) are engineered for enhanced braking performance and durability. Designed specifically for select Ford, Jaguar, and Lincoln models, these rotors provide reliable stopping power with improved heat dissipation and reduced brake fade.

• Cross-drilled and slotted surface for efficient heat and gas dissipation
• Vented rotor design with straight vanes to optimize cooling
• Coated hat finish to resist corrosion and extend rotor life
• Floating disc mounting for better rotor alignment and performance
• Compatible with 5-lug wheel setups with a 108 mm bolt circle diameter

Technical Specifications and Features

This disc brake rotor features a nominal thickness of 20.000 mm (0.787 inches) and a discard thickness of 18.500 mm (0.728 inches), ensuring precise wear limits for safe operation. The rotor's outside diameter measures 288.000 mm (11.339 inches), with an overall height of 32.700 mm (1.287 inches). The center hole diameter is 64.400 mm (2.535 inches), designed to fit specific hub assemblies. The rotor weighs approximately 12.25 lbs (5.57 kgs), balancing strength and weight for optimal braking response.

About the StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors Line

The StopTech Sport Cross-Drilled & Slotted Disc Brake Rotors line focuses on delivering rotors that improve braking efficiency through enhanced surface design and cooling capabilities. The combination of cross-drilled holes and precision slots helps to evacuate heat, brake dust, and gases generated during braking. This product line is tailored for drivers seeking consistent brake performance under demanding conditions, making it suitable for both street and light performance use.

Compatible Vehicles and Applications

This rotor is compatible with the following vehicles:

• Ford Thunderbird
• Jaguar S-Type, XJ8
• Lincoln LS, Vanden Plas

It is designed to replace original equipment rotors on these models, providing a direct fit and maintaining factory specifications.

Common Issues Addressed by This Rotor

• Brake fade caused by excessive heat buildup
• Uneven rotor wear and scoring
• Reduced braking performance due to gas and dust accumulation
• Corrosion and rust on rotor surfaces
• Vibration or noise from warped or damaged rotors

Installation Notes and Tips

• Ensure rotor discard thickness is not exceeded before installation
• Verify compatibility with vehicle ABS systems; this rotor does not include an ABS tone ring
• Use proper torque specifications for mounting bolts on the 5-lug, 108 mm bolt circle
• Inspect brake pads and replace if worn to prevent uneven rotor wear
• Clean rotor surface before installation to remove any protective coatings or contaminants

Quality Assurance and Warranty

StopTech rotors are manufactured to meet or exceed OEM standards for fit, form, and function. The coated hat finish provides corrosion resistance to extend rotor life. While specific warranty details are not provided here, StopTech products typically come with a limited warranty against defects in materials and workmanship. Always consult the product documentation or manufacturer for exact warranty terms.