Stoptech 128.33064R Disc Brake Rotor - Rear Right

StopTech Sport Cross-Drilled Disc Brake Rotors Overview

The StopTech Sport Cross-Drilled Disc Brake Rotor 128.33064R is engineered for Audi A6 Quattro and Allroad Quattro models. Designed to provide consistent braking performance, this solid rotor features a cross-drilled surface to aid in heat dissipation and maintain effective stopping power under demanding conditions.

• Cross-drilled solid disc brake rotor for improved heat management
• Coated hat finish to resist corrosion and extend rotor life
• Nominal thickness of 10.000 mm with discard thickness at 8.000 mm
• Overall diameter of 255 mm (10.039 inches) for precise fitment
• Floating disc mounting design with 5 lug holes (15.5 mm diameter)

Product Line Details: StopTech Sport Cross-Drilled Disc Brake Rotors

The StopTech Sport Cross-Drilled Disc Brake Rotors line focuses on delivering enhanced braking performance through advanced rotor surface technology. The cross-drilled design helps reduce brake fade by allowing heat and gases to escape more efficiently during braking. This rotor line is tailored for drivers seeking reliable stopping power and durability, making it suitable for Audi A6 Quattro and Allroad Quattro vehicles requiring solid rotors with improved thermal management.

Technical Specifications and Features

This StopTech rotor features a solid disc construction with a coated hat finish to protect against rust and corrosion. The rotor measures 255 mm (10.039 inches) in outside diameter and has an overall height of 47.8 mm (1.882 inches). The nominal thickness is 10.000 mm (0.390 inches), with a discard thickness of 8.000 mm (0.315 inches), ensuring clear service limits for safe operation. The center hole diameter is 68 mm (2.677 inches), and the mounting bolt hole circle diameter is 112 mm (4.409 inches), accommodating 5 lug holes with a diameter of 15.5 mm (0.610 inches). This rotor does not include ABS tone rings or bearings and uses a floating disc mounting system.

Applications and Problem Solving

• Compatible with Audi A6 Quattro and Allroad Quattro models requiring solid rotors
• Helps reduce brake fade during aggressive or prolonged braking
• Addresses rotor corrosion issues with coated hat finish
• Maintains consistent braking performance under high thermal loads
• Replaces worn or undersized rotors to restore proper brake function

Installation Notes and Tips

• Ensure rotor thickness is above discard thickness (8.000 mm) before installation
• Verify compatibility with vehicle lug pattern and mounting bolt circle diameter
• Clean rotor surface before installation to remove any protective coatings or residues
• Torque lug nuts to manufacturer specifications to avoid rotor warping
• Check brake pads for wear and replace if necessary to optimize braking performance

Quality Assurance and Warranty

StopTech Sport Cross-Drilled Disc Brake Rotors are manufactured to meet strict quality standards for durability and performance. The coated hat finish provides corrosion resistance to extend rotor life. While specific warranty details are not provided, StopTech products typically adhere to industry standards for material and workmanship. Always consult product documentation or manufacturer resources for warranty information.