Sunsong 2201957 Brake Hydraulic Hose - Front Left

Brake Hose for Honda Prelude Front Left

Sunsong 2201957 is a front left brake hydraulic hose for 1997-2001 Honda Prelude applications. It is built to restore original brake line routing and sealing on the Prelude front left position while meeting DOT, FMVSS 106, and SAE J1401 standards.

• Fits 1997-2001 Honda Prelude, front left
• Precision-engineered OE-style brake hydraulic hose
• EPDM hose material for brake system service
• 17.28 in. (439 mm) overall length
• Banjo end fitting on one side and 10 mm female fitting on the other
• Includes bracket and required wear components as specified by application
• Banjo-end design includes new copper washers for sealing

Detailed Product Overview

This Sunsong brake hose, part number 2201957, is made for the front left position on the Honda Prelude from 1997 through 2001. It is engineered to match the original fit and function of the factory hose, with application-specific brackets and protective components used where required to return the brake line assembly to proper condition. The hose uses EPDM construction and measures 17.28 inches long, with a 10 mm banjo fitting at one end and a 10 mm female fitting at the other. This part cross-references Dorman - First Stop H381050 and Raybestos Brakes BH381050 for the same application.

Common Brake Hose Replacement Reasons

• Cracked, swollen, or deteriorated brake hose material
• Brake fluid seepage at the hose ends or fittings
• Corrosion at the hard line connection or mounting points
• Restricted brake fluid flow causing uneven braking response
• Damage from road debris, moisture, or salt exposure

Installation Notes and Tips

Verify the front left routing, fitting style, and length before installation on your Honda Prelude. Replace any sealing washers required by the banjo connection and inspect the surrounding hard line, bracket, and mounting points for corrosion or wear before bleeding the brake system. After installation, bleed the brakes and check all connections for leaks.

Quality Assurance

Sunsong states that each hose is pressure tested before it leaves the factory. The hose assembly is manufactured to meet or exceed DOT, FMVSS 106, and SAE J1401 requirements, and the steel tubing used in the assembly is zinc electroplated for added resistance to rust and corrosion.