Sunsong 3502381 Power Steering Return Hose

Sunsong 3502381 Power Steering Return Hose

Sunsong 3502381 is a bulk power steering return hose for cut-to-fit applications across a wide range of Chrysler, Dodge, and Jeep vehicles. It uses CPE hose material and 11/32 in. ID hose ends to support low-pressure, high-temperature return-line service.

Key Features

• Power steering return hose for low-pressure return circuits
• Bulk 25-foot length for custom cut-to-length repairs
• 11/32 in. ID hose ends on both sides
• CPE hose construction for return-line service
• Maximum working pressure of 250 psi
• Cross-references Gates 349960 and TYC 30196 for the same application

Product Details

This Sunsong power steering return hose is built for vehicles that need a custom-length replacement instead of a pre-formed line. It is a direct match for many Chrysler PT Cruiser, Jeep Wrangler, and Dodge Dakota applications, including gear-to-cooler, cooler-to-reservoir, cooler-to-pump, and other return-line positions listed in the fitment data. Part number 3502381 is also referenced in bulk 11/32 in. x 25 ft. service applications where the hose must be trimmed to the required length.

The hose is rated for low-pressure, high-temperature operation and exceeds original equipment performance standards according to the manufacturer description. That makes it a practical choice for return-side steering repairs on vehicles such as the Jeep TJ, Dodge Ram 1500, and Chrysler Voyager when the original hose routing or length varies by configuration.

Common Repair Uses

• Leaking or cracked power steering return hose
• Incorrect hose length after steering system service
• Soft, swollen, or heat-damaged return-line hose
• Custom routing needs on bulk hose repairs
• Return-side steering fluid seepage at hose connections

Installation Notes and Tips

• Measure the original hose path before cutting the bulk hose.
• Confirm the required 11/32 in. hose size and return-line routing.
• Use the vehicle-specific fitment notes to match gear-to-cooler, cooler-to-reservoir, or other listed positions.
• Cut cleanly to length and inspect the hose ends before installation.
• Verify that the replacement is used only in return-line, low-pressure steering service.

Quality Assurance

Sunsong 3502381 is manufactured as a return hose for steering systems and is specified for 250 psi maximum working pressure in low-pressure, high-temperature applications. The part is listed with broad fitment coverage for Chrysler, Dodge, and Jeep models from 1985 through 2009.