/live/media/IZ/IZ_X32CJ1428_Fro.jpg)
Suspensia X32CJ1428 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
| Brand | Suspensia X32CJ1428 |
|---|---|
| Position | Front Right Lower |
| Material | Steel |
| Bushing Color | Black |
| Pre-Greased | Yes |
| Castle Nut Included | No |
| Grease Fitting Included | No |
| Bushings Included | Yes |
| Dust Boot Included | Yes |
| Ball Joint Mounting Type | Press in |
| Ball Joint Stud Type | Pinch |
| Ball Joint Included | Yes |
| Cotter Pin Included | No |
| Grade Type | Regular |
| Housing Material | Steel |
| Boot Material | Rubber |
| Greaseable | No |
| Boot Color | Black |
| Bearing Material | Plastic |
| Bushing Material | Rubber |
| Dust Boot Material | Rubber |
| 9906 | No |
| Lock Nut Included | No |
| Fits | Mazda · 6 vehicles |
OE direct fit. Built to match original chassis part dimensions and appearance.
Pre-greased assembly. Ready for service with a sealed, maintenance-free layout.
Steel construction. Uses steel housing and arm materials for a rigid replacement design.
Cross-references Dorman - OE Solutions 527-408, BCKE34300 and BCKE34300C for the same application. See all 11.
Overview
The Suspensia X32CJ1428 is a suspension control arm and ball joint assembly built for direct OE fit and OE appearance. It is engineered for the front right lower position on compatible Mazda 3 applications and uses steel construction with a pre-greased, sealed design.
Fits 2019-2024 Mazda 3, front right lower. The X32CJ1428 is a practical OE-style replacement for restoring suspension geometry and steering response in this application.
Key Features
- Steel control arm and housing construction
- Pre-greased assembly for ready-to-install service
- Press-in ball joint with pinch-style stud
- Rubber dust boot and rubber bushings
- Direct OE fit and OE look from Suspensia
Detailed Description
Suspensia manufactures chassis parts to OE or better quality standards for the North American aftermarket, and the X32CJ1428 follows that approach with a direct-fit design. This suspension control arm and ball joint assembly is built with steel components, black rubber boots and bushings, and a non-greaseable layout for a clean, service-ready replacement. The assembly is intended for 2019-2024 Mazda 3 front right lower applications and cross-references Dorman - OE Solutions 527-408 for the same application. Part number X32CJ1428 is also useful when verifying the correct replacement against catalog listings.
What It Is Used For
- Replacing worn control arm and ball joint components
- Restoring proper suspension alignment and geometry
- Addressing looseness, clunking, or play in the suspension
- Correcting uneven tire wear caused by worn chassis parts
- Returning stable steering feel in the front suspension
Installation Notes and Tips
Verify the vehicle position and lower front right application before installation. Because the ball joint uses a press-in mounting type and pinch-style stud, confirm the surrounding hardware and knuckle interface match the original design. Part number X32CJ1428 should be matched carefully to the vehicle catalog and existing suspension layout before service.
Quality Assurance
Suspensia states that its chassis parts are direct OE fit and OE look, and they are manufactured in an IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018 certified facility.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2024 | Mazda | 3 | Front Right Lower | — |
| 2023 | Mazda | 3 | Front Right Lower | — |
| 2022 | Mazda | 3 | Front Right Lower | — |
| 2021 | Mazda | 3 | Front Right Lower | — |
| 2020 | Mazda | 3 | Front Right Lower | — |
| 2019 | Mazda | 3 | Front Right Lower | — |
| No rows match your filter. | ||||