Suspensia X32SL0697 Suspension Stabilizer Bar Link - Front

Front Stabilizer Bar Link for Mazda Applications

The Suspensia X32SL0697 is a front suspension stabilizer bar link built with a steel body, pre-greased construction, and a protective dust boot. It is made for direct OE fit and OE look applications, giving you a replacement part that matches the original suspension layout on select Mazda models.

• Steel construction for suspension service
• Pre-greased for initial operation
• Dust boot included to help protect the joint area
• Threaded ball joint stud type
• Steel ball stud bearing and housing materials
• Lock nuts included
• Overall length: 306
• Part number: X32SL0697

Detailed Product Overview

Suspensia manufactures OE or better quality chassis parts for the North American aftermarket, with production in a fully automated OE manufacturing facility in Turkiye. The X32SL0697 stabilizer bar link is engineered for front suspension use on the 2019-2025 Mazda 3, 2020-2025 Mazda CX-30, and 2023-2025 Mazda CX-50. If you are replacing a worn front sway bar link on a Mazda 3, Mazda CX-30, or Mazda CX-50, this part number X32SL0697 provides a direct-fit chassis solution built to match OE dimensions and appearance.

This part cross-references Mevotech Supreme MS76889 for the same application.

Common Problems This Part Addresses

• Front suspension clunking or rattling over bumps
• Excessive play in the stabilizer bar connection
• Worn or damaged sway bar link joints
• Noise from a loose front anti-roll bar linkage
• Restoring proper front suspension connection on Mazda 3, CX-30, or CX-50 models

Installation Notes and Tips

Install this stabilizer bar link at the front suspension position only. Verify the overall length, threaded stud style, and OE-style mounting points before installation on your Mazda 3, Mazda CX-30, or Mazda CX-50. Because this link is pre-greased and not greaseable, no grease fitting service is required during normal use. Lock nuts are included; other hardware such as castle nuts, bushings, cotter pins, washers, bolts, and sleeves are not included.

Quality Assurance

Suspensia chassis parts are produced in an IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018 certified facility with high-volume automated assembly. The X32SL0697 is built to OE fit and OE look standards for front suspension service.