TC Remanufacturing DA60 Automatic Transmission Torque Converter

Automatic Transmission Torque Converter for Infiniti and Nissan

TC Remanufacturing DA60 is an automatic transmission torque converter built with a clutch pack design, low stall characteristics, and OE-style mounting dimensions. It is a direct-fit option for select Infiniti and Nissan applications, including Infiniti G35, FX35, FX45, M35, M45, EX35, Q45, and Nissan 350Z models.

Key Features

• Part number: DA60
• Automatic transmission torque converter with clutch pack construction
• Low stall setup for controlled launch characteristics
• 10.900-inch converter diameter
• 9.750-inch bolt circle
• 4-pad mounting type with 10mm x 1.0 mounting thread size
• 24-spline count
• Milled flats hub type
• 0.785 pilot diameter and 0.825 pilot length
• No ring gear
• Converter codes: A2, A3, AZ

Detailed Description

TC Remanufacturing DA60 is an automatic transmission torque converter for select Infiniti and Nissan rear-wheel-drive applications. The clutch pack design, low stall specification, and OE-style dimensions support proper transmission engagement and drivability in vehicles such as the Infiniti G35, FX35, FX45, M35, M45, EX35, Q45, and Nissan 350Z. The DA60 part number is a useful reference when matching the correct converter by code and mounting configuration.

This torque converter uses a 10.900-inch diameter, 9.750-inch bolt circle, 4-pad mounting pattern, and 10mm x 1.0 thread size. Additional identifying details include a 24-spline count, milled flats hub type, 0.785 pilot diameter, and 0.825 pilot length. Converter codes A2, A3, and AZ help confirm application matching during transmission service.

Vehicle Fitment

• Fits 2008-2010 Infiniti EX35, N/A
• Fits 2003-2010 Infiniti FX35, N/A
• Fits 2006-2010 Infiniti M35, N/A
• Fits 2006-2010 Infiniti M45, N/A
• Fits 2003-2004 Infiniti M45, N/A
• Fits 2003-2008 Infiniti FX45, N/A
• Fits 2003-2008 Infiniti G35, N/A
• Fits 2003 Infiniti Q45, N/A
• Fits 2003 Nissan 350Z, N/A

Common Issues This Part Can Address

• Torque converter shudder during acceleration
• Delayed or inconsistent transmission engagement
• Excessive slip under load
• Converter code mismatch during transmission rebuilds
• Incorrect stall characteristics after service

Installation Notes and Tips

Verify the converter code, spline count, pilot dimensions, and mounting pattern before installation. Confirm the transmission application against the vehicle’s original converter specifications, especially on Infiniti G35, FX35, and Nissan 350Z models where multiple converter configurations may exist. Inspect the transmission fluid, cooler, and flexplate condition during replacement to help prevent repeat failure.

Quality Assurance

TC Remanufacturing focuses on remanufactured drivetrain components for transmission service work. DA60 is built around defined fitment and dimensional specifications to support accurate replacement selection for the listed Infiniti and Nissan applications.