Timken HA590733 Wheel Bearing and Hub Assembly - Rear

Timken HA590733 Wheel Bearing and Hub Assembly Overview

The Timken HA590733 wheel bearing and hub assembly is engineered for reliable performance in Hyundai and Kia vehicles. Designed specifically for models like the Hyundai Elantra GT, Forte, and Ioniq, this non-driven hub assembly ensures precise fitment and durability.

• Flange bolt hole quantity: 4 for secure mounting
• Wheel pilot diameter: 2.637 inches (67.00 mm)
• Brake pilot diameter: 2.992 inches (76.00 mm)
• Wheel stud quantity: 5 for optimal wheel attachment
• Hub pilot diameter: 2.913 inches (74.00 mm)
• Flange offset: 2.401 inches (61.00 mm)
• Flange diameter: 5.433 inches (138.00 mm)
• Bolt circle diameter: 4.500 inches (114.30 mm)
• Drive type: Non-driven hub assembly

Detailed Product Description

The Timken HA590733 is a wheel bearing and hub assembly designed to meet the exact specifications required by Hyundai and Kia vehicles, including the Elantra GT, Forte, and Ioniq. This assembly features a flange with four bolt holes and a five-stud wheel configuration, providing a secure and stable connection to the vehicle’s suspension and wheel. The precise wheel pilot diameter of 2.637 inches (67.00 mm) and brake pilot diameter of 2.992 inches (76.00 mm) ensure proper alignment with the brake components, while the hub pilot diameter of 2.913 inches (74.00 mm) supports accurate hub positioning. The flange offset of 2.401 inches (61.00 mm) and flange diameter of 5.433 inches (138.00 mm) are engineered to maintain correct wheel positioning and balance. This non-driven hub assembly is suitable for front or rear applications where the hub is not connected to the drive axle.

Common Applications and Problem Resolution

• Replacement for worn or damaged wheel bearing and hub assemblies on Hyundai Elantra GT, Forte, and Ioniq
• Eliminates wheel noise caused by bearing wear or failure
• Resolves wheel vibration and uneven tire wear due to hub misalignment
• Addresses ABS sensor issues related to faulty hub assemblies (if applicable)
• Restores proper wheel mounting and brake component alignment

Installation Notes and Tips

Ensure the vehicle is securely lifted and supported before beginning installation. Remove the wheel and brake components to access the existing hub assembly. Verify the flange bolt hole quantity and wheel stud count match the replacement part. Clean the mounting surface thoroughly to prevent misalignment. Torque all flange bolts to manufacturer specifications. After installation, check wheel alignment and test drive to confirm proper operation.

Quality Assurance and Warranty

Timken manufactures the HA590733 wheel bearing and hub assembly to meet OEM standards for fit, form, and function. While specific warranty details are not provided here, Timken products typically come with a limited warranty covering defects in materials and workmanship. Refer to Timken’s official documentation for complete warranty information.