Timken HB88107A Drive Shaft Center Support Bearing

OE Quality 60-Day Returns

Timken HB88107A Drive Shaft Center Support Bearing

Brand	Timken HB88107A
Fits	Chevrolet, Ford, GMC, Dodge, Oldsmobile, Isuzu, International, and Checker · 1500 vehicles

Pre-greased, pre-sealed. An added grease barrier helps extend bearing life.

Reinforced steel bracket. Heavy-gauge cold-rolled steel adds strength and durability.

Rubber cushion support. Absorbs and isolates vibration to simplify installation.

Cross-references Timken HB88107A, 1700537 and 1700537A for the same application. See all 10.

$50.59Free shipping

In stock · usually ships same day before 1pm CST

Step 1 — Confirm fitment

Free return shipping if it doesn't fit when you check fitment here first.

Select your vehicle to confirm fitment

Verify this part fits before purchasing — free returns if it doesn't

Step 2 — Quantity

Free shipping to the continental U.S.

Free returns within 60 days if it doesn't fit when fitment is verified.

Not what you need? See all Drive Shaft Center Support Bearing options

Timken HB88107A Drive Shaft Center Support Bearing

The Timken HB88107A drive shaft center support bearing is built for driveline service on a wide range of trucks, vans, and SUVs. It combines a pre-greased, pre-sealed bearing insert with a reinforced steel bracket and rubber cushion to help control vibration and support driveline alignment.

For Silverado 1500, Silverado 2500 HD, Ford F-250 Super Duty, and other listed applications, this center support bearing is a direct replacement option built around the required 35 mm inner diameter and OE-style mounting dimensions.

Key Features

Pre-greased and pre-sealed bearing insert with an added grease barrier for extended bearing life
Heavy-duty bracket made from reinforced, heavy-gauge cold-rolled steel
Rubber cushion helps absorb and isolate driveline vibration
Built to Timken performance and quality standards
35.00 mm bearing inside diameter, 103.75 mm outside diameter, and 57.15 mm bore centerline height
Direct-fit driveline center support bearing for many Chevrolet, GMC, Ford, Dodge, and Isuzu applications

Product Details

Timken HB88107A is a drive shaft center support bearing assembly for vehicles that use a supported two-piece driveshaft layout. The bearing insert is sealed and pre-lubricated, while the bracket and rubber isolator help maintain driveline stability under load. This makes it a practical replacement for worn center support bearings that can create vibration, noise, or driveline movement.

This part cross-references 1700537 and PBS7 for the same application. It is listed for vehicles such as 1999-2007 Ford F-250 Super Duty, 2001-2007 Chevrolet Silverado 2500 HD, and 1999-2006 Chevrolet Silverado 1500, along with many other truck and van platforms.

Common Problems This Part Can Address

Driveline vibration at speed
Clunking or rumbling from the center of the driveshaft
Excess movement in a worn center support bearing
Noise caused by a deteriorated rubber cushion or bearing insert
Loss of driveline support on two-piece driveshaft setups

Installation Notes and Tips

Verify the bearing inside diameter, outside diameter, and bore centerline height before installation. Confirm the vehicle’s driveshaft configuration and compare the mounting dimensions to the original part, especially on applications noted as non-slinger or bearing assembly styles. For best results, inspect the driveshaft, carrier mounting points, and surrounding driveline components for wear before installing the replacement.

Quality Assurance

Timken rigorously inspects driveline center support bearings to meet its performance and quality standards. The HB88107A is engineered with a sealed bearing insert, grease barrier, and reinforced bracket construction to support consistent service in demanding driveline applications.

This part fits 1500 vehicles

Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.

Year	Make	Model	Position	Notes
2007	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2007	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2007	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2006	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	Chevrolet	Silverado 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2006	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2006	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	GMC	Sierra 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2006	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2006	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	Chevrolet	Silverado 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2005	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2005	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	GMC	Sierra 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2005	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2005	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2004	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2004	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	Ford	E-250	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2004	Ford	E-350 Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2004	Ford	E-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2004	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2004	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2004	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2004	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2004	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2004	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	Chevrolet	Silverado 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2003	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2003	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	Ford	E-250	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2003	Ford	E-350 Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2003	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2003	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2003	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	GMC	Sierra 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2003	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2003	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2003	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2002	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	Chevrolet	Silverado 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2002	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2002	Chevrolet	Silverado 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2002	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	Ford	E-250 Econoline	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2002	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2002	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2002	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2002	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2002	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	GMC	Sierra 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2002	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2002	GMC	Sierra 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2002	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2002	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2001	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Chevrolet	Silverado 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2001	Chevrolet	Silverado 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2001	Chevrolet	Silverado 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2001	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
2001	Dodge	Ram 1500 Van	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
2001	Ford	E-250 Econoline	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2001	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2001	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2001	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2001	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2001	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	GMC	Sierra 1500 HD	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2001	GMC	Sierra 2500 HD	N/A	1.38 in. 35mm I.D.; Non Slinger
2001	GMC	Sierra 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2001	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2001	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
2000	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2000	Chevrolet	Suburban 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	Chevrolet	Suburban 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2000	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
2000	Dodge	Ram 1500 Van	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
2000	Ford	E-250 Econoline	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2000	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2000	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
2000	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
2000	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2000	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2000	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
2000	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
2000	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	GMC	Yukon XL 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
2000	Isuzu	Amigo	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
2000	Isuzu	Hombre	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
2000	Isuzu	Trooper	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
2000	Isuzu	VehiCROSS	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
2000	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1999	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	Chevrolet	Silverado 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	Chevrolet	Silverado 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1999	Dodge	Ram 1500 Van	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1999	Ford	E-250 Econoline	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
1999	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
1999	Ford	F-250	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
1999	Ford	F-250 Super Duty	N/A	35mm ID - 25mm Width - 57mm Centerline Height - 168.1mm Bolt Hole Center - 1 Slinger; Bearing Assembly
1999	Ford	F-350 Super Duty	N/A	Spicer 1310, 1330 Series - Slip Yoke; Bearing Assembly
1999	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1999	GMC	Sierra 1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	GMC	Sierra 2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1999	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1999	Isuzu	Amigo	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1999	Isuzu	Hombre	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1999	Isuzu	Oasis	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1999	Isuzu	Trooper	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1999	Isuzu	VehiCROSS	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1999	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1998	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	Dodge	B1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1998	Dodge	B3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1998	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1998	Dodge	Ram 2500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1998	Dodge	Ram 2500	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1998	Dodge	Ram 3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1998	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1998	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1998	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1998	Isuzu	Amigo	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1998	Isuzu	Hombre	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1998	Isuzu	Oasis	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1998	Isuzu	Trooper	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1998	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1997	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	Chevrolet	Express 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	Dodge	B1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1997	Dodge	B3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1997	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1997	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1997	Dodge	Ram 2500	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1997	Dodge	Ram 3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1997	Ford	Ranger	N/A	1.38 in. I.D. - 2.25 in. Center-line Height - 6.62 in. Bolt Hole Center - 1 Slinger
1997	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1997	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	GMC	Savana 3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1997	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1997	Isuzu	Hombre	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1997	Isuzu	Oasis	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1997	Isuzu	Trooper	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1997	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1996	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1996	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1996	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	Dodge	B1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1996	Dodge	B3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1996	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1996	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1996	Dodge	Ram 2500	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1996	Dodge	Ram 3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1996	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1996	Ford	Ranger	N/A	1.38 in. I.D. - 2.25 in. Center-line Height - 6.62 in. Bolt Hole Center - 1 Slinger
1996	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1996	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1996	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1996	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1996	Isuzu	Hombre	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1996	Isuzu	Oasis	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1996	Isuzu	Trooper	N/A	Drive Shaft Center Support Bearing - Fits Spicer 1280 and 1410 with 1.38 inch inner diameter, does not have a slinger.
1996	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1995	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1995	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1995	Chevrolet	Tahoe	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	Dodge	B1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1995	Dodge	B3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1995	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1995	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1995	Dodge	Ram 2500	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1995	Dodge	Ram 3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1995	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1995	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1995	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1995	Ford	F-150	N/A	Drive Shaft Center Support Bearing Assembly
1995	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1995	Ford	Ranger	N/A	1.38 in. I.D. - 2.25 in. Center-line Height - 6.62 in. Bolt Hole Center - 1 Slinger
1995	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1995	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1995	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1995	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1995	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1994	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1994	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1994	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1994	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1994	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1994	Dodge	Ram 1500	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1994	Dodge	Ram 2500	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1994	Dodge	Ram 3500	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1994	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1994	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1994	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1994	Ford	F-150	N/A	Drive Shaft Center Support Bearing Assembly
1994	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1994	Ford	Ranger	N/A	1.38 in. I.D. - 2.25 in. Center-line Height - 6.62 in. Bolt Hole Center - 1 Slinger
1994	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1994	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1994	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1994	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1994	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1994	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1993	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1993	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1993	Chevrolet	S10	N/A	Non Slinger
1993	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1993	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1993	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1993	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1993	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1993	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1993	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1993	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1993	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1993	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1993	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1993	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1993	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1993	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1993	Ford	F-150	N/A	Drive Shaft Center Support Bearing Assembly
1993	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1993	Ford	Ranger	N/A	1.38 in. I.D. - 2.25 in. Center-line Height - 6.62 in. Bolt Hole Center - 1 Slinger
1993	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1993	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1993	GMC	Jimmy	N/A	Non Slinger
1993	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1993	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1993	GMC	Sonoma	N/A	Non Slinger
1993	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1993	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1992	Chevrolet	C1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	Chevrolet	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1992	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	Chevrolet	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1992	Chevrolet	S10	N/A	Non Slinger
1992	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1992	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1992	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1992	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1992	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1992	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1992	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1992	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1992	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1992	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1992	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1992	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1992	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1992	GMC	Jimmy	N/A	Non Slinger
1992	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1992	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1992	GMC	Sonoma	N/A	Non Slinger
1992	GMC	Yukon	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1992	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1991	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1991	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	Chevrolet	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	Chevrolet	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	Chevrolet	S10	N/A	Non Slinger
1991	Chevrolet	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	Chevrolet	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1991	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1991	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1991	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1991	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1991	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1991	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1991	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1991	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1991	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1991	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1991	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1991	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	GMC	R1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1991	GMC	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	GMC	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	GMC	S15 Jimmy	N/A	Non Slinger
1991	GMC	Sonoma	N/A	Non Slinger
1991	GMC	V1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1991	GMC	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1991	GMC	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1991	Oldsmobile	Bravada	N/A	Drive Shaft Center Support Bearing Assembly
1990	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1990	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1990	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1990	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1990	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1990	Chevrolet	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	Chevrolet	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	Chevrolet	S10	N/A	Non Slinger
1990	Chevrolet	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	Chevrolet	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1990	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1990	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1990	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1990	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1990	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1990	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1990	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1990	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1990	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1990	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1990	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1990	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1990	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1990	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1990	GMC	R1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1990	GMC	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	GMC	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1990	GMC	S15	N/A	Non Slinger
1990	GMC	S15 Jimmy	N/A	Non Slinger
1990	GMC	V1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1990	GMC	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1990	GMC	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1989	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1989	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1989	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1989	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1989	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1989	Chevrolet	R2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	Chevrolet	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	Chevrolet	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	Chevrolet	S10	N/A	Non Slinger
1989	Chevrolet	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	Chevrolet	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1989	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1989	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1989	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1989	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1989	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1989	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1989	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1989	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1989	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1989	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1989	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1989	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1989	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1989	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1989	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1989	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1989	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1989	GMC	R1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1989	GMC	R2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	GMC	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	GMC	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1989	GMC	S15	N/A	Non Slinger
1989	GMC	S15 Jimmy	N/A	Non Slinger
1989	GMC	V1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1989	GMC	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1989	GMC	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	Chevrolet	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	Chevrolet	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1988	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1988	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1988	Chevrolet	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1988	Chevrolet	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	Chevrolet	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1988	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1988	Chevrolet	R20	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	Chevrolet	R20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	Chevrolet	R30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	Chevrolet	S10	N/A	Non Slinger
1988	Chevrolet	V20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	Chevrolet	V30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1988	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1988	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1988	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1988	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1988	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1988	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1988	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1988	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1988	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1988	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1988	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1988	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1988	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1988	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1988	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1988	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1988	GMC	R1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1988	GMC	R2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	GMC	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	GMC	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1988	GMC	S15	N/A	Non Slinger
1988	GMC	S15 Jimmy	N/A	Non Slinger
1988	GMC	V1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1988	GMC	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1988	GMC	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1987	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1987	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1987	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1987	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1987	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1987	Chevrolet	R20	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	Chevrolet	R20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	Chevrolet	R30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1987	Chevrolet	S10	N/A	Non Slinger
1987	Chevrolet	V20	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	Chevrolet	V20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	Chevrolet	V30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1987	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1987	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1987	Dodge	Dakota	N/A	Drive Shaft Center Support Bearing Assembly
1987	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1987	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1987	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1987	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1987	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1987	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1987	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1987	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1987	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1987	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1987	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1987	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1987	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1987	GMC	R1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1987	GMC	R1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1987	GMC	R2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	GMC	R2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	GMC	R3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1987	GMC	S15	N/A	Non Slinger
1987	GMC	S15 Jimmy	N/A	Non Slinger
1987	GMC	V1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1987	GMC	V1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1987	GMC	V2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	GMC	V2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1987	GMC	V3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1986	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1986	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1986	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1986	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1986	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1986	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1986	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1986	Chevrolet	S10	N/A	Non Slinger
1986	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1986	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1986	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1986	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1986	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1986	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1986	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1986	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1986	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1986	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1986	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1986	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1986	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1986	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1986	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1986	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1986	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1986	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1986	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1986	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1986	GMC	S15	N/A	Non Slinger
1986	GMC	S15 Jimmy	N/A	Non Slinger
1985	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1985	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1985	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1985	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1985	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1985	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1985	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1985	Chevrolet	S10	N/A	Non Slinger
1985	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1985	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Dodge	B250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1985	Dodge	B350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1985	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Dodge	D250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1985	Dodge	D350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Dodge	Ramcharger	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1985	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1985	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Dodge	W250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1985	Dodge	W350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1985	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1985	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1985	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1985	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1985	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1985	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1985	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1985	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1985	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1985	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1985	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1985	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1985	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1985	GMC	S15	N/A	Non Slinger
1985	GMC	S15 Jimmy	N/A	Non Slinger
1984	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1984	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1984	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1984	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1984	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1984	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1984	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1984	Chevrolet	S10	N/A	Non Slinger
1984	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1984	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Dodge	B250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1984	Dodge	B350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1984	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Dodge	D250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1984	Dodge	D350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1984	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Dodge	W250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1984	Dodge	W350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1984	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1984	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1984	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1984	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1984	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1984	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1984	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1984	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1984	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1984	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1984	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1984	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1984	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1984	GMC	S15	N/A	Non Slinger
1984	GMC	S15 Jimmy	N/A	Non Slinger
1983	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1983	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1983	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1983	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1983	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1983	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1983	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1983	Chevrolet	S10	N/A	Non Slinger
1983	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1983	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Dodge	B250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1983	Dodge	B350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1983	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Dodge	D250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1983	Dodge	D350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1983	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Dodge	W250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1983	Dodge	W350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1983	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1983	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1983	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1983	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1983	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1983	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1983	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1983	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1983	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1983	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1983	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1983	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1983	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1983	GMC	S15	N/A	Non Slinger
1983	GMC	S15 Jimmy	N/A	Non Slinger
1982	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1982	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1982	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1982	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1982	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1982	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1982	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1982	Chevrolet	S10	N/A	Non Slinger
1982	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1982	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Dodge	B250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1982	Dodge	B350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1982	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Dodge	D250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1982	Dodge	D350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1982	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Dodge	W250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1982	Dodge	W350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1982	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1982	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1982	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1982	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1982	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1982	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1982	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1982	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1982	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1982	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1982	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1982	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1982	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1982	GMC	S15	N/A	Non Slinger
1981	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1981	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1981	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1981	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1981	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1981	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1981	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1981	Dodge	B150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1981	Dodge	B250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Dodge	B250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Dodge	B350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1981	Dodge	B350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1981	Dodge	D250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Dodge	D250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Dodge	D350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1981	Dodge	D350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1981	Dodge	W250	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Dodge	W250	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Dodge	W350	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1981	Dodge	W350	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1981	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1981	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1981	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1981	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1981	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1981	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1981	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1981	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1981	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1981	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1981	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1981	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1981	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1980	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1980	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1980	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1980	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1980	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1980	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1980	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1980	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1980	Dodge	B200	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1980	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1980	Dodge	D200	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1980	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1980	Dodge	W200	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1980	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1980	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1980	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1980	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1980	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1980	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1980	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1980	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1980	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1980	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1980	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1980	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1980	GMC	P1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1980	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1980	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1979	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1979	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1979	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1979	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1979	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1979	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1979	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1979	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1979	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	B200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Dodge	B200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1979	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1979	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	B300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1979	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1979	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	D200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Dodge	D200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1979	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1979	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	D300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1979	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	W200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Dodge	W200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1979	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1979	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Dodge	W300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1979	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1979	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1979	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1979	GMC	C2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	GMC	C2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	GMC	C3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1979	GMC	G1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1979	GMC	G2500	N/A	1.38 in. 35mm I.D.; Slinger
1979	GMC	G3500	N/A	Drive Shaft Center Support Bearing Assembly
1979	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1979	GMC	K1500	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1979	GMC	K1500 Suburban	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1979	GMC	K2500	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	GMC	K2500 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1979	GMC	K3500	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1979	GMC	P1500	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1979	GMC	P2500	N/A	1.38 in. 35mm I.D.; Slinger
1979	GMC	P3500	N/A	Drive Shaft Center Support Bearing Assembly
1978	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1978	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1978	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1978	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1978	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1978	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1978	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1978	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1978	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1978	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1978	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1978	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1978	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	B200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Dodge	B200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1978	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1978	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	B300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1978	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1978	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	D200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Dodge	D200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1978	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1978	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	D300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1978	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	W200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Dodge	W200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1978	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1978	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Dodge	W300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1978	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1978	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1978	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1978	GMC	G15	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1978	GMC	G25	N/A	1.38 in. 35mm I.D.; Slinger
1978	GMC	G35	N/A	Drive Shaft Center Support Bearing Assembly
1978	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1977	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1977	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1977	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1977	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1977	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1977	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1977	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1977	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1977	Chevrolet	K30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1977	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1977	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1977	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1977	Dodge	B200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	B200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1977	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1977	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	B300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1977	Dodge	D150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1977	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	D200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Dodge	D200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1977	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1977	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	D300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1977	Dodge	W150	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1977	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	W200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Dodge	W200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1977	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1977	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Dodge	W300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1977	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1977	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	E-350 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1977	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1977	GMC	G15	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1977	GMC	G25	N/A	1.38 in. 35mm I.D.; Slinger
1977	GMC	G35	N/A	Drive Shaft Center Support Bearing Assembly
1977	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1976	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1976	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1976	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1976	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1976	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1976	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1976	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1976	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1976	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1976	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1976	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1976	Dodge	B200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	B200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1976	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1976	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	B300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1976	Dodge	D200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	D200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1976	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1976	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	D300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1976	Dodge	W200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	W200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1976	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1976	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Dodge	W300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1976	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1976	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1976	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1976	GMC	G15	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1976	GMC	G25	N/A	1.38 in. 35mm I.D.; Slinger
1976	GMC	G35	N/A	Drive Shaft Center Support Bearing Assembly
1976	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1975	Chevrolet	C20	N/A	1.38 in. 35mm I.D.; Non Slinger
1975	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1975	Chevrolet	C30	N/A	Drive shaft center support bearing compatible with Spicer 1280, 1310, and 1330 sizes, featuring a 1.38 inch inner diameter bearing assembly.
1975	Chevrolet	G10	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1975	Chevrolet	G20	N/A	1.38 in. 35mm I.D.; Slinger
1975	Chevrolet	G30	N/A	Drive Shaft Center Support Bearing Assembly
1975	Chevrolet	K20	N/A	1.38 in. 35mm I.D.; Non Slinger
1975	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1975	Chevrolet	P20	N/A	1.38 in. 35mm I.D.; Slinger
1975	Chevrolet	P30	N/A	Drive Shaft Center Support Bearing Assembly
1975	Dodge	B100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1975	Dodge	B200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Dodge	B200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	B200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1975	Dodge	B300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1975	Dodge	B300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	B300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Dodge	D100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1975	Dodge	D200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Dodge	D200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	D200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1975	Dodge	D300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1975	Dodge	D300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	D300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Dodge	W100	N/A	1.38 in. 35mm I.D.; Bearing and Hanger Assembly
1975	Dodge	W200	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Dodge	W200	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	W200	N/A	Drive Shaft Center Support Bearing - 1.38 in. I.D.
1975	Dodge	W300	N/A	Spicer - 1.38 in. I.D.; Non Slinger
1975	Dodge	W300	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Dodge	W300	N/A	1.38 inch I.D. drive shaft center support bearing - Detroit
1975	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1975	Ford	E-100 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-100 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-100 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-150 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	E-150 Econoline	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-150 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-150 Econoline Club Wagon	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-150 Econoline Club Wagon	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-250 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-250 Econoline Club Wagon	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	E-350 Econoline	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-100	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	F-100	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-100	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-150	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1975	Ford	F-150	N/A	Spicer 1280, 1310 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-150	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-250	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	Ford	F-350	N/A	Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D.; Bearing Assembly
1975	GMC	G15	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1975	GMC	G25	N/A	1.38 in. 35mm I.D.; Slinger
1975	GMC	G35	N/A	Drive Shaft Center Support Bearing Assembly
1975	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1974	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1974	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1974	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1974	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1974	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1974	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1974	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1974	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1973	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1973	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1973	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1973	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1973	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1973	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1973	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1973	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1972	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1972	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1972	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1972	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1972	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1972	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1972	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1972	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1971	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1971	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1971	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1971	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1971	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1971	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1971	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1971	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1970	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1970	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1970	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1970	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1970	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1970	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1970	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1970	GMC	Jimmy	N/A	1.38 in., 35mm I.D. - .98 in. Width - 6.62 Bolt Hole Center; Non Slinger
1969	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1969	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1969	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1969	Ford	E-100 Econoline	N/A	1.38 in. I.D. Drive Shaft Center Support Bearing for Spicer 1260 and 1410 applications
1969	Ford	E-100 Econoline	N/A	Spicer 1260, 1480 - 1.38 in. I.D.; Bearing Assembly
1969	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1969	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1968	Chevrolet	C20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1968	Chevrolet	K20 Suburban	N/A	1.38 in. 35mm I.D.; Non Slinger
1968	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1968	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1968	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1967	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1967	GMC	G15/G1500 Van	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1967	GMC	G25/G2500 Van	N/A	1.38 in. 35mm I.D.; Slinger
1966	Ford	Bronco	N/A	Spicer 1280, 1310 - 1.38 in. I.D. - Slip Yoke Style; Bearing Assembly
1966	GMC	G1000 Series	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1965	GMC	G1000 Series	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
1964	GMC	G1000 Series	N/A	Drive Shaft Center Support Bearing - 1.38 in. inner diameter, .98 in. width, 6.62 in. bolt hole center
No rows match your filter.

Directly replaces or cross-references 10 part numbers

Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.

Timken — HB88107A17005371700537A17005471700547AI700537I700547PBS7PBS8PBS9

Timken HB88107A Drive Shaft Center Support Bearing

Your Fitment Guarantee includes

Activate Free Return Shipping

Timken HB88107A Drive Shaft Center Support Bearing

Key Features

Product Details

Common Problems This Part Can Address

Installation Notes and Tips

Quality Assurance