/live/media/SA/SA_AD8052_Fro.jpg)
TrakMotive AD-8052 CV Axle Shaft - Front Left or Front Right
| Brand | TrakMotive AD-8052 |
|---|---|
| Position | Front Left |
| Abs Ring Tooth Count | 96 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 3/5 |
| Axle Nut Height (mm) | 15 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/2 |
| Axle Nut Length (mm) | 37 |
| Axle Nut Locking Type | Self-Lock |
| Axle Nut Thread Size | M22*1.5 |
| Boot Material | Neoprene |
| Inboard Bolt Head Size (in) | 1/3 |
| Inboard Bolt Head Size (mm) | 8 |
| Inboard Bolt Head Type | Allen |
| Inboard Bolt Length (in) | 2 1/6 |
| Inboard Bolt Length (mm) | 55 |
| Inboard Bolt Thread Size | M10*1.5 |
| Inboard Joint Type | Bolt-On |
| Inboard Shaft Connection Style | Bolt-On |
| New Or Remanufactured | New |
| Number Of Inboard Joint Bolt Holes | 6 |
| Number Of Inboard Shaft Bolts | 6 |
| Number Of Outboard Splines | 26 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 25.98 |
| Overall Compressed Length (mm) | 660 |
| Product line | CV Axle Shaft |
| Fits | Audi · 6 vehicles |
New unit. Built as a fresh replacement, not remanufactured.
Neoprene boot. Helps resist wear while keeping the joint protected.
Bolt-on design. Simplifies installation with conventional shaft connections.
Cross-references Pioneer Automotive Industries 607127, TrakMotive AD-8052 and 60-7006 for the same application. See all 12.
TrakMotive AD-8052 CV Axle Shaft
TrakMotive AD-8052 is a new CV axle shaft for front axle service on select Audi 5000 Quattro models. It is built for 1986-1988 Audi 5000 Quattro front right and front left applications, with fitment-specific details that matter for driveline repair and ABS-equipped vehicles.
Key Features
- Brand: TrakMotive CV Axle Shaft
- Part number: AD-8052
- New axle shaft assembly
- Overall compressed length: 25.98 in. (660 mm)
- Outboard joint type: conventional
- Inboard joint type: bolt-on
- Inboard shaft connection style: bolt-on
- Outboard splines: 26
- ABS tone ring included with 96-tooth toothed ring
- Neoprene boot material
- Axle nut included; M22 x 1.5 thread, 32 mm hex, self-locking type
Product Details
TrakMotive AD-8052 is a CV axle shaft engineered for front driveline replacement on the Audi 5000 Quattro. The axle uses a bolt-on inboard connection, a conventional outboard joint, and a 26-spline outboard design to match the listed applications. The included ABS tone ring and 96-tooth toothed ring support ABS-equipped setups, while TrakMotive notes that ABS axles fit non-ABS applications unless otherwise noted. This part cross-references Pioneer Automotive Industries 607127 for the same application.
For Audi 5000 Quattro front axle repair, AD-8052 provides the fitment details needed for a direct replacement search. It is a TrakMotive CV axle shaft for 1986-1988 Audi 5000 Quattro front right and front left positions, and the compressed length of 25.98 inches helps confirm application matching during ordering.
Common Issues This Part Can Address
- Clicking or popping from a worn front CV joint
- Vibration during acceleration from a damaged axle shaft
- Grease leakage from a deteriorated neoprene boot
- ABS warning concerns related to a failed tone ring or axle sensor interface
- Driveline noise caused by excessive axle wear
Installation Notes and Tips
Verify the axle nut thread size, hex size, spline count, and overall compressed length before installation. Confirm whether the vehicle is equipped with ABS and compare the tone ring configuration to the removed axle. For Audi 5000 Quattro front right or front left service, inspect the hub, seals, and mounting hardware condition before installing the new axle shaft. Torque fasteners to the vehicle manufacturer’s specifications.
Quality Assurance
TrakMotive states that this axle shaft is backed by a limited lifetime warranty. The company also identifies its manufacturing quality system as ISO 9001:1007 and TS 16949:2009 certified.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1988 | Audi | 5000 Quattro | Front Right | CV Axle Shaft |
| 1988 | Audi | 5000 Quattro | Front Left | CV Axle Shaft |
| 1987 | Audi | 5000 Quattro | Front Right | CV Axle Shaft |
| 1987 | Audi | 5000 Quattro | Front Left | CV Axle Shaft |
| 1986 | Audi | 5000 Quattro | Front Right | CV Axle Shaft |
| 1986 | Audi | 5000 Quattro | Front Left | CV Axle Shaft |
| No rows match your filter. | ||||