/live/media/SA/SA_AD8199_Fro.jpg)
TrakMotive AD-8199 CV Axle Shaft - Rear Right
| Brand | TrakMotive AD-8199 |
|---|---|
| Position | Rear Right |
| ABS Ring Tooth Count | 0 |
| ABS Tone Ring Included | No |
| Axle Bolt Hex Size (mm) | 17 |
| Axle Bolt Length (mm) | 85 |
| Axle Bolt Thread Size | M16x1.5 |
| Axle Nut Included | No |
| Grade Type | Premium |
| Inboard Joint Boot Material | Neoprene |
| Inboard Joint Type | Bolt-on |
| Inboard Shaft Connection Style | Bolt-on |
| Number Of Bolt Holes | 1 |
| Number Of Inboard Joint Bolt Holes | 6 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 0 |
| Number Of Outboard Joint Bolt Holes | 1 |
| Number Of Outboard Shaft Bolts | 1 |
| Number Of Outboard Splines | 42 |
| Outboard Joint Boot Material | Neoprene |
| Outboard Joint Type | Audi style spline bolt |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 22.99 |
| Overall Compressed Length (mm) | 584 |
| Overall Extended Length (in) | 25.35 |
| Overall Extended Length (mm) | 644 |
| Product line | CV Axle Shaft |
| Fits | Audi · 4 vehicles |
Bolt-on design. Simplifies installation with a direct-fit CV axle shaft.
Neoprene boots. Help protect the joints from wear and contamination.
Premium grade. Built as a dependable driveline replacement part.
Cross-references TrakMotive AD-8199, 80A 501 204 C and 80A501204C for the same application. See all 4.
Rear Right CV Axle Shaft for Audi Q5
TrakMotive AD-8199 is a rear right CV axle shaft for 2018-2021 Audi Q5 applications. It is built as a premium driveline replacement with OE-style fitment to help maintain original ride quality on the rear passenger side.
Key Features
- Fits 2018-2021 Audi Q5, rear right
- Premium-grade CV axle shaft for driveline service
- 42-spline outboard shaft connection
- Bolt-on inboard joint design with 6 bolt holes
- Neoprene boot material on both inboard and outboard joints
- Overall compressed length: 22.99 in. (584 mm)
- Overall extended length: 25.35 in. (644 mm)
- ABS tone ring not included; ABS ring tooth count: 0
Product Details
TrakMotive CV Axle Shaft AD-8199 is engineered for the rear right position on the Audi Q5 and follows an OEM-style axle layout to retain original ride quality. The axle uses a spline-style outboard shaft connection, an Audi-style spline bolt outboard joint, and a bolt-on inboard joint configuration for direct replacement service. TrakMotive’s CV axle shaft line focuses on driveline fit and consistent replacement geometry, and this part is backed by the brand’s limited lifetime warranty. This part cross-references 80A 501 204 C for the same application.
Common Repair Uses
- Replacing a worn rear right CV axle on an Audi Q5
- Addressing clicking or vibration from a damaged axle assembly
- Restoring smooth power transfer through the rear driveline
- Correcting boot wear or joint play in the axle assembly
- Returning the vehicle to OE-style ride quality after axle service
Installation Notes and Tips
Verify rear right fitment before ordering and confirm axle length, spline count, and bolt pattern against the original part. The axle bolt uses an M16x1.5 thread with a 17 mm hex and an 85 mm length. An axle nut is not included. ABS axles fit non-ABS applications unless otherwise noted by the vehicle configuration.
Quality Assurance
TrakMotive manufactures this CV axle shaft as an ISO 9001:2008 and TS 16949:2009 certified company. AD-8199 is covered by a limited lifetime warranty.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2021 | Audi | Q5 | — | — | — | Rear Right | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| 2020 | Audi | Q5 | — | — | — | Rear Right | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| 2019 | Audi | Q5 | AWD | 2.0L | L4 | Rear Right | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| 2018 | Audi | Q5 | AWD | 2.0L | L4 | Rear Right | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| No rows match your filter. | |||||||