/live/media/SA/SA_AD86004_Fro.jpg)
TrakMotive AD-86004 CV Axle Shaft - Front
| Brand | TrakMotive AD-86004 |
|---|---|
| Position | Front |
| ABS Ring Tooth Count | 0 |
| ABS Tone Ring Included | No |
| Axle Bolt Hex Size (mm) | 19 |
| Axle Bolt Length (mm) | 86 |
| Axle Bolt Thread Size | M16x1.5 |
| Axle Nut Included | No |
| Grade Type | Premium |
| Inboard Joint Type | Flange |
| Number Of Bolt Holes | 0 |
| Number Of Inboard Joint Bolt Holes | 6 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 0 |
| Number Of Outboard Joint Bolt Holes | 1 |
| Number Of Outboard Shaft Bolts | 0 |
| Number Of Outboard Splines | 42 |
| Outboard Joint Type | Audi style spline bolt |
| Overall Compressed Length (in) | 19.25 |
| Overall Compressed Length (mm) | 489 |
| Overall Extended Length (in) | 21.5 |
| Overall Extended Length (mm) | 546 |
| Product line | AAR CV Axle Shaft |
| Fits | Audi · 4 vehicles |
Premium grade. Built as a CV axle shaft for dependable driveline performance.
Flange inboard joint. Provides a secure, straightforward connection at the shaft end.
Quality-certified manufacturing. Made by an ISO 9001:2008 and TS 16949:2009 certified company.
Cross-references TrakMotive AD-86004, 4G0407271D and 60-7532 for the same application. See all 4.
TrakMotive AD-86004 Front CV Axle Shaft
The TrakMotive AAR CV Axle Shaft AD-86004 is built for front driveline service on select Audi applications. It is a premium-grade replacement for 2012-2015 Audi A6 models with OE AAR design, offering the correct spline, flange, and bolt pattern details needed for a direct-fit repair.
The AAR CV Axle Shaft line is focused on OE-style fitment and application-specific construction. For buyers searching for a front CV axle shaft for Audi A6, AD-86004 provides the dimensional and connection details needed to match the original driveline layout.
- Fits 2012-2015 Audi A6, front
- Premium grade replacement CV axle shaft
- OE AAR design for the listed application
- Inboard joint type: flange
- Outboard joint type: Audi style spline bolt
- Outboard splines: 42
- Inboard joint bolt holes: 6
- Axle bolt thread size: M16x1.5
- Axle bolt hex size: 19 mm
- Axle bolt length: 86 mm
- Overall compressed length: 489 mm (19.25 in)
- Overall extended length: 546 mm (21.5 in)
This front CV axle shaft for Audi A6 is intended for driveline repair where the original axle shows wear, vibration, clicking, or joint looseness. The AD-86004 matches the listed OE AAR design and uses the specified flange and spline configuration for the front position on 2012-2015 Audi A6 models. This part cross-references 4G0407271D and NCV72169 for the same application.
Common Repair Applications
- Clicking or popping during turns from worn CV joints
- Vibration under acceleration from axle wear or imbalance
- Grease leakage from a damaged axle boot or joint seal
- Clunking or looseness in the front driveline
- Replacement for a damaged OE AAR-style front axle assembly
Installation Notes
Verify the front application, OE AAR design, and all connection details before installation. Confirm the axle bolt thread size, bolt length, hex size, spline count, and flange configuration against the removed part. ABS tone ring is not included, and this axle is listed with no ABS ring tooth count. Axle nut is not included.
Quality Assurance
TrakMotive lists this CV axle shaft under premium grade construction and backs it with a limited lifetime warranty. The manufacturer also notes ISO 9001:2008 and TS 16949:2009 certified company standards.
| Year | Make | Model | Transmission | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2015 | Audi | A6 | Automatic CVT | 2.0L | L4 | Front | OE AAR design; AAR CV Axle Shaft |
| 2014 | Audi | A6 | Automatic CVT | 2.0L | L4 | Front | OE AAR design; AAR CV Axle Shaft |
| 2013 | Audi | A6 | Automatic CVT | 2.0L | L4 | Front | OE AAR design; AAR CV Axle Shaft |
| 2012 | Audi | A6 | Automatic CVT | 2.0L | L4 | Front | OE AAR design; AAR CV Axle Shaft |
| No rows match your filter. | |||||||