/live/media/SA/SA_AM8003XTT_Fro.jpg)
TrakMotive AM-8003XTT CV Axle Shaft - Front Right
| Brand | TrakMotive AM-8003XTT |
|---|---|
| Position | Front Right |
| Abs Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 0.85 |
| Axle Nut Height (mm) | 21.5 |
| Axle Nut Hex Size (in) | 1.42 |
| Axle Nut Hex Size (mm) | 36 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.64 |
| Axle Nut Length (mm) | 41.57 |
| Axle Nut Locking Type | Self-lock |
| Axle Nut Thread Size | M24*2 |
| Boot Material | Neoprene |
| Inboard Joint Type | Female |
| Inboard Shaft Connection Style | Female |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 29 |
| Number Of Outboard Splines | 27 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 23.5 |
| Overall Compressed Length (mm) | 597 |
| Product line | Extended Travel CV Axle Shaft |
| Fits | Jeep · 6 vehicles |
Extended travel design. Sliding center bar adds up to 44 mm more travel than a typical OEM shaft.
Greater articulation angle. CV joints reach up to 47 degrees for more suspension movement.
Neoprene boot material. Helps protect the joint with a durable, flexible cover.
Cross-references TrakMotive AM-8003XTT, 40-14202 and 80-0617 for the same application. See all 15.
Extended Travel CV Axle for Jeep Liberty
The TrakMotive Extended Travel CV Axle Shaft, part number AM-8003XTT, is built for 2002-2006 Jeep Liberty front right applications that need more suspension movement than a standard OE axle can provide. It is designed for lifted or stock suspensions and for on-road or off-road use where added articulation and travel matter.
Key Features
- Extended Travel CV axle shaft for the front right position
- Sliding center bar provides up to 44 mm more travel than an OEM CV shaft
- CV joints allow up to 47 degrees of articulation versus a typical 23-degree OE joint
- Neoprene boot material for CV joint protection
- New axle assembly with included axle nut
- Female inboard connection with 29 inboard splines and 27 outboard splines
- 36 mm axle nut hex size, M24x2 thread, self-locking design
- Overall compressed length: 23.5 in. (597 mm)
Product Details
TrakMotive AM-8003XTT is an extended travel CV axle shaft engineered for Jeep Liberty front right fitment. The extended travel design uses a sliding center bar to increase axle movement, while the high-articulation CV joints help maintain driveline engagement through suspension travel changes. This makes it a direct-fit driveline solution for Jeep Liberty owners running stock-height or lifted setups and looking for a front axle built around greater suspension range. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Axle Helps Address
- Front axle binding during suspension droop or compression
- CV joint angle limitations on lifted Jeep Liberty setups
- Noise or vibration related to worn front right CV axle components
- Reduced axle travel after suspension modifications
- Driveline stress from off-road articulation demands
Installation Notes and Tips
Fits 2002-2006 Jeep Liberty, front right. Confirm spline count, axle nut thread size, and compressed length before installation. Inspect the hub, seals, and mating components for wear, and replace in pairs when the opposite side shows similar mileage or wear. Proper torque procedures should be followed during installation to help ensure correct axle retention and driveline operation.
Quality Assurance
TrakMotive manufactures this as a new extended travel CV axle shaft for driveline service applications. The design focuses on increased travel and articulation compared with a typical OE CV shaft, making it a technical replacement choice for Jeep Liberty front right service.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2006 | Jeep | Liberty | 4WD | 2.8L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| 2005 | Jeep | Liberty | 4WD | 2.8L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| 2005 | Jeep | Liberty | 4WD | 2.4L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| 2004 | Jeep | Liberty | 4WD | 2.4L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| 2003 | Jeep | Liberty | 4WD | 2.4L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| 2002 | Jeep | Liberty | 4WD | 2.4L | L4 | Front Right | Extended Travel - High Articulation, for lifted or stock suspensions, on or off road.; Always Replace in Pairs; Extended Travel CV Axle Shaft |
| No rows match your filter. | |||||||