/live/media/SA/SA_CH8076_Fro.jpg)
TrakMotive CH-8076 CV Axle Shaft - Front Right
| Brand | TrakMotive CH-8076 |
|---|---|
| Position | Front Right |
| Abs Ring Tooth Count | 50 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 6/7 |
| Axle Nut Height (mm) | 22 |
| Axle Nut Hex Size (in) | 1 2/7 |
| Axle Nut Hex Size (mm) | 32.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/2 |
| Axle Nut Length (mm) | 37.9 |
| Axle Nut Locking Type | Self-Lock |
| Axle Nut Thread Size | M27*2 |
| Boot Material | Neoprene |
| Inboard Joint Type | Female |
| Inboard Shaft Connection Style | Female |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 27 |
| Number Of Outboard Splines | 33 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 20.83 |
| Overall Compressed Length (mm) | 529 |
| Product line | CV Axle Shaft |
| Fits | Chrysler · 3 vehicles |
New axle shaft. Fresh replacement part for driveline service.
Neoprene boot. Helps protect the joint from wear and contamination.
ABS tone ring included. Built with a toothed ring for ABS-equipped applications.
Cross-references AP Exhaust 8724, Cardone New 66-3442 and Cardone Reman 60-3442 for the same application. See all 10.
CV Axle Shaft for Chrysler 300M
TrakMotive CH-8076 is a new CV axle shaft for the front right position on 2002-2004 Chrysler 300M models. It is built with a neoprene boot, a toothed ABS tone ring, and a self-lock axle nut to support a direct replacement for the original driveline component.
Key Features
- Fits 2002-2004 Chrysler 300M, front right
- TrakMotive CV Axle Shaft, part number CH-8076
- New construction with female inboard connection and conventional outboard joint
- ABS tone ring included with 50-tooth toothed ring design
- Neoprene boot material for driveline protection
- Axle nut included with M27 x 2 thread size and self-lock design
- 27 inboard splines and 33 outboard splines
- Overall compressed length: 20.83 in. (529 mm)
Detailed Description
TrakMotive CH-8076 is a CV axle shaft for Chrysler 300M front right applications covering 2002, 2003, and 2004 model years. This axle shaft is configured with a female inboard shaft connection, a conventional outboard shaft connection, and a compressed length of 20.83 inches to match the specified drivetrain layout. The included ABS tone ring and 50-tooth toothed ring design support vehicles equipped with ABS, while TrakMotive notes that ABS axles fit non-ABS applications unless otherwise noted. This part cross-references Cardone New 66-3442 for the same application.
Common Replacement Reasons
- Clicking or popping during turns from worn CV joints
- Vibration under acceleration from a damaged axle shaft
- Torn boot or grease loss at the CV joint
- ABS warning concerns related to a failed tone ring or axle sensor interface
- Driveline noise caused by spline or joint wear
Installation Notes and Tips
Verify spline counts, axle diameter, and overall length against the original shaft before installation. Confirm the front right position and compare the axle nut thread size, hex size, and locking style to the vehicle’s original hardware. For 2002-2004 Chrysler 300M front right service, matching the ABS tone ring configuration is important when the vehicle is equipped with ABS.
Quality Assurance
TrakMotive identifies this CV axle shaft as a new replacement part from an ISO 9001:1007 and TS 16949:2009 certified company. It is backed by a limited lifetime warranty.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2004 | Chrysler | 300M | Special | Front Right | Compare spline counts and diameter to original; CV Axle Shaft |
| 2003 | Chrysler | 300M | Special | Front Right | Compare spline counts and diameter to original; CV Axle Shaft |
| 2002 | Chrysler | 300M | Special | Front Right | Compare spline counts and diameter to original; CV Axle Shaft |
| No rows match your filter. | |||||