/live/media/SA/SA_CH8243_Fro.jpg)
TrakMotive CH-8243 CV Axle Shaft - Rear Left
| Brand | TrakMotive CH-8243 |
|---|---|
| Position | Rear Left |
| Abs Ring Tooth Count | 48 |
| Abs Ring Type | Magnetic |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 3/4 |
| Axle Nut Height (mm) | 18.9 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 31.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/3 |
| Axle Nut Length (mm) | 34.4 |
| Axle Nut Locking Type | Self-Lock |
| Axle Nut Thread Size | M22*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Male |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 27 |
| Number Of Outboard Splines | 32 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 31.77 |
| Overall Compressed Length (mm) | 807 |
| Product line | CV Axle Shaft |
| Fits | Chrysler and Dodge · 18 vehicles |
New axle shaft. Built as a fresh replacement for driveline service.
Neoprene boot. Helps resist wear while keeping the joint protected.
ABS tone ring included. Magnetic ring and axle nut are included for a complete install.
Cross-references TrakMotive CH-8243, 4726009AA and 52123883AA for the same application. See all 4.
TrakMotive CH-8243 CV Axle Shaft
TrakMotive CH-8243 is a new rear left CV axle shaft for select 2011-2014 Chrysler 300, Dodge Challenger, and Dodge Charger applications. Built for direct driveline replacement, it uses a 27-spline inboard connection, 32-spline outboard connection, and a 31.77-inch overall compressed length for the listed rear-left fitments.
Key Features
- Brand: TrakMotive CV Axle Shaft
- Part number: CH-8243
- Rear left application for select Chrysler 300, Dodge Challenger, and Dodge Charger models
- New axle shaft construction
- 27 inboard splines and 32 outboard splines
- Overall compressed length: 31.77 in. (807 mm)
- Neoprene boot material
- ABS tone ring included with 48-tooth magnetic ring
- Axle nut included with M22 x 1.5 thread, self-lock design, and 1 1/4 in. hex size
Product Details
TrakMotive CH-8243 is part of the CV Axle Shaft line, a driveline replacement category focused on restoring axle function and wheel-end power transfer. This axle is listed for rear left use on 2011-2014 Chrysler 300, 2011-2014 Dodge Challenger, and 2011-2014 Dodge Charger applications. Compare spline counts and shaft diameter to the original unit before ordering, especially on Chrysler 300 rear left and Dodge Charger rear left fitments.
This part cross-references OE numbers 4726009AA and 52123883AA for the same application.
What This Axle Shaft Helps Address
- Clicking or popping noises from a worn CV joint
- Vibration during acceleration from a damaged axle assembly
- Grease leakage from a torn or deteriorated boot
- Wheel-end driveline play caused by spline or joint wear
- ABS warning concerns related to a damaged tone ring or sensor interface
Installation Notes
Verify rear-left position, spline count, and axle length against the original shaft before installation. Confirm ABS configuration and tone-ring requirements for the vehicle, and inspect the axle nut thread size and hex dimensions during service. Proper torque procedures and final road testing are recommended after installation.
Quality Assurance
TrakMotive states that this axle shaft is backed by a limited lifetime warranty and produced by an ISO 9001:1007 and TS 16949:2009 certified company.
| Year | Make | Model | Submodel | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 2014 | Chrysler | 300 | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2014 | Chrysler | 300 | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2014 | Dodge | Challenger | SXT | — | 3.6L | V6 | Rear Left | Standard Duty Replacement; CV Axle Shaft |
| 2014 | Dodge | Charger | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2014 | Dodge | Charger | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2013 | Chrysler | 300 | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2013 | Chrysler | 300 | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2013 | Dodge | Challenger | SXT | — | 3.6L | V6 | Rear Left | Standard Duty Replacement; CV Axle Shaft |
| 2013 | Dodge | Charger | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2013 | Dodge | Charger | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2012 | Chrysler | 300 | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2012 | Chrysler | 300 | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2012 | Dodge | Challenger | SXT | — | 3.6L | V6 | Rear Left | Standard Duty Replacement; CV Axle Shaft |
| 2012 | Dodge | Charger | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2012 | Dodge | Charger | — | AWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2011 | Chrysler | 300 | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| 2011 | Dodge | Challenger | — | — | 3.6L | V6 | Rear Left | Standard Duty Replacement; CV Axle Shaft |
| 2011 | Dodge | Charger | — | RWD | 3.6L | V6 | Rear Left | Compare spline counts and diameter to original; CV Axle Shaft |
| No rows match your filter. | ||||||||