/live/media/SA/SA_HY8332_Fro.jpg)
TrakMotive HY-8332 CV Axle Shaft - Front Left
| Brand | TrakMotive HY-8332 |
|---|---|
| Position | Front Left |
| Abs Ring Tooth Count | 48 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 0.91 |
| Axle Nut Height (mm) | 23 |
| Axle Nut Hex Size (in) | 1.26 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.45 |
| Axle Nut Length (mm) | 36.95 |
| Axle Nut Locking Type | Stake |
| Axle Nut Thread Size | M24*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Spline |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 27 |
| Number Of Outboard Splines | 30 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 27.28 |
| Overall Compressed Length (mm) | 693 |
| Product line | AAR CV Axle Shaft |
| Fits | Hyundai · 9 vehicles |
New CV axle shaft. Built with spline connections and conventional joint design.
Neoprene boot material. Helps resist wear while keeping the assembly protected.
ABS tone ring included. Toothed ring with 48 teeth for ABS applications.
Cross-references TrakMotive HY-8332, HY20070ER and NCV37124 for the same application. See all 3.
TrakMotive HY-8332 Front Left CV Axle Shaft
The TrakMotive HY-8332 is a new front left CV axle shaft for select Hyundai Tucson applications. Built as an AAR CV axle shaft, it is engineered for OE-style driveline fitment on 2015-2021 Hyundai Tucson models with the specified front left position coverage.
Key Features
- Brand: TrakMotive AAR CV Axle Shaft line
- Part number: HY-8332
- Fits 2015-2018 Hyundai Tucson, front left
- Fits 2019-2021 Hyundai Tucson, front left
- New axle shaft with neoprene boot material
- Inboard joint type: male with spline connection
- Outboard joint type: conventional with spline connection
- ABS tone ring included; 48-tooth toothed ABS ring
- Axle nut included with M24 x 1.5 thread, 32 mm hex size, stake locking type
- Overall compressed length: 693 mm (27.28 in)
Product Details
TrakMotive HY-8332 is built for front left Hyundai Tucson driveline service where a direct replacement CV axle shaft is needed. The AAR CV Axle Shaft line is positioned for OE-style application coverage, and this unit includes the ABS tone ring configuration specified for the listed fitments. It uses a male inboard joint, conventional outboard joint, and spline-style shaft connections for a precise driveline interface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Applications
- Clicking or popping noises during turns from a worn CV joint
- Vibration or shudder under acceleration from axle wear
- Grease leakage from a damaged neoprene boot
- ABS warning concerns related to a damaged tone ring or axle sensor interface
- Driveline noise caused by excessive axle play or spline wear
Installation Notes
Verify front left placement, axle length, spline count, and axle nut thread size before installation. Confirm ABS ring configuration and tone ring tooth count against the vehicle’s original setup, especially on 2015-2018 Hyundai Tucson and 2019-2021 Hyundai Tucson applications. Use the included axle nut with the correct 32 mm hex size and stake-style locking method, and follow factory torque procedures during installation.
Quality Assurance
TrakMotive identifies this axle as a new component and notes ISO 9001:1007 and TS 16949:2009 certified company standards. The HY-8332 also carries a limited lifetime warranty.
| Year | Make | Model | Submodel | Drive Type | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 2021 | Hyundai | Tucson | — | FWD | 2.0L | L4 | — | Front Left | OE AAR design; AAR CV Axle Shaft |
| 2020 | Hyundai | Tucson | — | FWD | 2.0L | L4 | — | Front Left | OE AAR design; AAR CV Axle Shaft |
| 2019 | Hyundai | Tucson | — | FWD | 2.0L | L4 | — | Front Left | OE AAR design; AAR CV Axle Shaft |
| 2018 | Hyundai | Tucson | — | FWD | 2.4L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| 2018 | Hyundai | Tucson | — | FWD | 2.0L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| 2017 | Hyundai | Tucson | — | FWD | 2.0L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| 2016 | Hyundai | Tucson | — | FWD | 2.0L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| 2015 | Hyundai | Tucson | Limited | FWD | 2.4L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| 2015 | Hyundai | Tucson | GLS | FWD | 2.0L | L4 | GAS | Front Left | Updated Design; AAR CV Axle Shaft |
| No rows match your filter. | |||||||||