/live/media/SA/SA_HY86066_Fro.jpg)
TrakMotive HY-86066 CV Axle Shaft - Front Right
| Brand | TrakMotive HY-86066 |
|---|---|
| Position | Front Right |
| ABS Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 13/16 |
| Axle Nut Height (mm) | 20 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 31.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 7/16 |
| Axle Nut Length (mm) | 36.72 |
| Axle Nut Locking Type | Stake |
| Axle Nut Thread Size | M22*1.5 |
| Inboard Joint Boot Material | Thermoplastic |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Spline |
| Number Of Inboard Splines | 27 |
| Number Of Outboard Splines | 27 |
| Outboard Joint Boot Material | Thermoplastic |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 38 5/8 |
| Overall Compressed Length (mm) | 980.5 |
| Overall Extended Length (in) | 40 3/8 |
| Overall Extended Length (mm) | 1026 |
| Product line | CV Axle Shaft |
| Fits | Hyundai · 1 vehicle |
OE-style replacement. CV axle shaft with spline connections for straightforward installation.
Thermoplastic boots. Help protect the joints from wear and contamination.
Certified quality. Built by an ISO 9001:2008 and TS 16949:2009 certified company.
Cross-references TrakMotive HY-86066 for the same application. See all 1.
Front Right CV Axle Shaft for Hyundai Elantra
TrakMotive HY-86066 is a front right CV axle shaft for the 2021 Hyundai Elantra standard duty replacement application. It is built with 27 inboard splines and 27 outboard splines, a male inboard joint, and a conventional outboard joint for direct driveline service.
This TrakMotive CV axle shaft line is focused on OE-style driveline replacement parts for passenger vehicles. HY-86066 includes a stake-style axle nut with M22 x 1.5 thread, and the axle is configured for non-ABS use with no ABS tone ring included.
Key Features
- Fits 2021 Hyundai Elantra, front right
- TrakMotive part number HY-86066
- 27-spline inboard and 27-spline outboard shaft connection
- Male inboard joint with spline connection style
- Conventional outboard joint with thermoplastic boot material
- Thermoplastic inboard joint boot material
- Axle nut included; hex head, stake locking type, M22 x 1.5 thread
- No ABS tone ring included
- Overall compressed length: 38 5/8 in. Overall extended length: 40 3/8 in.
Product Details
HY-86066 is a driveline and axle component engineered for the front right position on the 2021 Hyundai Elantra. The axle’s spline count, joint style, and overall length are key identifiers for matching the correct replacement part during CV axle service. TrakMotive HY-86066 is a direct-fit style axle shaft for standard duty replacement needs on this vehicle.
This part cross-references TrakMotive HY-86066 for the same application.
Common Repair Symptoms
- Clicking or popping during turns from a worn CV joint
- Vibration during acceleration from a damaged axle shaft
- Grease leakage from torn CV boots
- Clunking or driveline noise from excessive axle wear
- Loss of smooth power transfer to the front wheels
Installation Notes
Verify spline count, axle length, and front right position before installation. Confirm the vehicle uses the non-ABS axle configuration shown for this application, and match the included axle nut thread size and locking style to the original setup. Inspect hub, transmission, and seal surfaces during replacement to help ensure proper fit and operation.
Quality Assurance
TrakMotive states that this CV axle shaft is backed by a limited lifetime warranty. The manufacturer also notes ISO 9001:2008 and TS 16949:2009 certified company standards for production and quality management.
| Year | Make | Model | Transmission | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2021 | Hyundai | Elantra | Manual | 1.6L | L4 | Front Right | Standard Duty Replacement; CV Axle Shaft |
| No rows match your filter. | |||||||