/live/media/SA/SA_HY86082_Fro.jpg)
TrakMotive HY-86082 CV Axle Shaft - Rear Left
| Brand | TrakMotive HY-86082 |
|---|---|
| Position | Rear Left |
| ABS Ring Tooth Count | 47 |
| ABS Ring Type | Toothed |
| ABS Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 1.06 |
| Axle Nut Height (mm) | 27 |
| Axle Nut Hex Size (in) | 1.25 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.44 |
| Axle Nut Length (mm) | 37 |
| Axle Nut Locking Type | Cotter pin |
| Axle Nut Socket Size | 32 |
| Axle Nut Thread Size | M22x1.5 |
| Grade Type | Premium |
| Inboard Joint Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Spline |
| Number Of Bolt Holes | 0 |
| Number Of Inboard Joint Bolt Holes | 0 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 28 |
| Number Of Outboard Joint Bolt Holes | 0 |
| Number Of Outboard Shaft Bolts | 0 |
| Number Of Outboard Splines | 30 |
| Outboard Joint Boot Material | Neoprene |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 31.375 |
| Overall Compressed Length (mm) | 797 |
| Product line | CV Axle Shaft |
| Fits | Hyundai · 3 vehicles |
OE-style replacement. Built as a CV axle shaft for straightforward driveline service.
Neoprene boots. Help protect the joints from dirt and moisture.
ABS tone ring included. Supports ABS-equipped applications when specified.
Cross-references TrakMotive HY-86082 for the same application. See all 1.
Rear Left CV Axle Shaft for Hyundai Genesis
TrakMotive HY-86082 is a premium CV axle shaft for the rear left position on 2012-2014 Hyundai Genesis models. It is built as an OEM-style axle to help maintain original ride quality while restoring driveline performance.
Key Features
- Fits 2012-2014 Hyundai Genesis, rear left
- TrakMotive CV Axle Shaft, part number HY-86082
- Premium grade construction for driveline service
- 28 inboard splines and 30 outboard splines
- Neoprene boot material on both inboard and outboard joints
- Conventional outboard joint design with male inboard joint
- ABS tone ring included with 47-tooth toothed ring
- Axle nut included: M22x1.5 thread, 32 mm hex size, cotter pin locking type
- Overall compressed length: 31.375 in (797 mm); extended length: 34.56 in (878 mm)
Detailed Description
TrakMotive HY-86082 is a rear left CV axle shaft for the 2012-2014 Hyundai Genesis, engineered for OE-style fit and driveline function. The axle uses a spline-style shaft connection with 28 inboard splines and 30 outboard splines, along with neoprene boots at both joints for service-focused durability. The included ABS tone ring uses a 47-tooth toothed design, and the axle nut is supplied with the correct M22x1.5 thread and 32 mm hex size for the listed application. TrakMotive positions this CV axle shaft as a direct replacement for Hyundai Genesis rear left service where original ride quality and axle geometry matter. Part number HY-86082 is also referenced as HY-86082 for ordering and catalog lookup.
What This Part Helps Address
- Clicking or popping from a worn CV joint
- Vibration during acceleration or deceleration
- Axle shaft play caused by spline or joint wear
- ABS warning concerns related to a damaged tone ring
- Loss of smooth power transfer to the rear wheel
Installation Notes and Tips
Verify rear left fitment against the vehicle’s axle length, spline count, and ABS configuration before installation. The product is listed for ABS axles that fit non-ABS applications unless otherwise noted, so confirm the vehicle’s original setup and sensor requirements. Use the supplied axle nut specified for this application and follow factory torque procedures during installation. For best results, inspect related seals, hub components, and suspension hardware while servicing the axle.
Quality Assurance
TrakMotive states that this CV axle shaft is backed by a limited lifetime warranty. The company is ISO 9001:2008 and TS 16949:2009 certified, supporting controlled manufacturing and quality management for driveline components.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2014 | Hyundai | Genesis | 3.8L | V6 | Rear Left | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| 2013 | Hyundai | Genesis | 3.8L | V6 | Rear Left | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| 2012 | Hyundai | Genesis | 3.8L | V6 | Rear Left | OEM Style Axle to Retain Original Ride Quality; CV Axle Shaft |
| No rows match your filter. | ||||||