/live/media/SA/SA_KA8135_Fro.jpg)
TrakMotive KA-8135 CV Axle Shaft - Front Left
| Brand | TrakMotive KA-8135 |
|---|---|
| Position | Front Left |
| Abs Ring Tooth Count | 52 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 0.94 |
| Axle Nut Height (mm) | 24 |
| Axle Nut Hex Size (in) | 1.26 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.45 |
| Axle Nut Length (mm) | 36.95 |
| Axle Nut Locking Type | Stake |
| Axle Nut Thread Size | M22*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Spline |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 28 |
| Number Of Outboard Splines | 27 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 26.73 |
| Overall Compressed Length (mm) | 679 |
| Product line | AAR CV Axle Shaft |
| Fits | Kia · 4 vehicles |
New CV axle shaft. Direct replacement for a worn driveline component.
Neoprene boot material. Helps resist wear while keeping the joint protected.
ABS tone ring included. Ready for applications that use a toothed sensor ring.
Cross-references TrakMotive KA-8135, 49500C5200 and NCV75077 for the same application. See all 3.
Front Left CV Axle for Kia Sorento
TrakMotive KA-8135 is a new AAR CV axle shaft built for front left service on select 2015-2018 Kia Sorento models. It is engineered with the listed spline counts, ABS tone ring, and included axle nut details to match the application requirements for this vehicle platform.
Key Features
- Fits 2015-2018 Kia Sorento, front left
- TrakMotive AAR CV Axle Shaft, part number KA-8135
- New axle assembly with neoprene boot material
- ABS tone ring included with 52-tooth toothed ring
- Inboard male joint with spline connection
- Outboard conventional joint with spline connection
- Includes axle nut with M22 x 1.5 thread, 32 mm hex size, and stake locking type
- Overall compressed length: 26.73 in. (679 mm)
Product Details
This TrakMotive AAR CV axle shaft is specified for the front left position on 2015, 2016, 2017, and 2018 Kia Sorento models. The KA-8135 uses a 28-spline inboard connection and 27-spline outboard connection, along with a toothed ABS ring and tone ring to support the vehicle’s wheel speed sensing setup where equipped. TrakMotive identifies this axle as a new replacement part, and the brand notes ISO 9001:1007 and TS 16949:2009 certified manufacturing practices.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Restores driveline transfer to the front left wheel
- Addresses clicking or popping during turns caused by worn CV joints
- Replaces a damaged axle shaft with boot wear or grease loss
- Corrects vibration or shudder related to axle wear
- Supports ABS-equipped front axle service on the listed Sorento applications
Installation Notes
Verify the front left fitment, spline count, compressed length, and axle nut specifications before installation. Confirm whether the vehicle uses an ABS-equipped configuration and compare the existing axle to the KA-8135 details, including the 52-tooth tone ring and M22 x 1.5 axle nut thread. Proper torque procedures and hub/knuckle inspection should be followed during replacement.
Quality Assurance
TrakMotive backs this CV axle shaft with a limited lifetime warranty. The manufacturer also states that ABS axles fit non-ABS applications unless otherwise noted, and that its production is supported by ISO 9001:1007 and TS 16949:2009 certification.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2018 | Kia | Sorento | AWD | 2.4L | L4 | Front Left | Updated Design; AAR CV Axle Shaft |
| 2017 | Kia | Sorento | AWD | 2.4L | L4 | Front Left | Updated Design; AAR CV Axle Shaft |
| 2016 | Kia | Sorento | AWD | 2.4L | L4 | Front Left | Updated Design; AAR CV Axle Shaft |
| 2015 | Kia | Sorento | — | 2.4L | L4 | Front Left | Updated Design; AAR CV Axle Shaft |
| No rows match your filter. | |||||||