TrakMotive MB-8010 CV Axle Shaft - Rear Left or Rear Right

Mercedes-Benz ML-Class Rear CV Axle Shaft

TrakMotive MB-8010 is a new rear CV axle shaft for select Mercedes-Benz ML-Class applications. It is built with a neoprene boot, a 32-spline inboard male connection, and a conventional 30-spline outboard connection for direct driveline replacement on the rear left or rear right side.

Key Features

• New CV axle shaft for rear driveline service
• Fits rear right and rear left positions on select Mercedes-Benz ML320, ML430, ML500, and ML55 AMG applications
• Overall compressed length: 31.14 in. (791 mm)
• Neoprene boot material for CV joint protection
• Inboard joint type: male; outboard joint type: conventional
• 32 inboard splines and 30 outboard splines
• ABS tone ring included with 48-tooth window-style ring
• Axle nut included; M24 x 1.5 thread, 36 mm hex, self-locking design
• TrakMotive MB-8010 cross-references Cardone New 66-9017 and National 229010 for the same application

Product Details

TrakMotive MB-8010 is a CV axle shaft for Mercedes-Benz ML-Class rear axle service, covering 1998-2005 ML320, 1999-2001 ML430, 2000-2003 ML55 AMG, 2002-2005 ML500, and 2003-2005 ML350 in rear left and rear right positions. The axle is new, not remanufactured, and includes an ABS tone ring with a 48-tooth window pattern for applications that require wheel speed signal integration. TrakMotive identifies this part line as a CV axle shaft replacement built under ISO 9001:1007 and TS 16949:2009 certified manufacturing controls.

Common Repair Applications

• Clicking or popping from the rear axle during turns
• Vibration or shudder from worn CV joints
• Torn boot or grease loss at the axle shaft
• ABS warning concerns related to a damaged tone ring
• Driveline noise from a worn rear axle assembly

Installation Notes

Verify rear left or rear right placement before ordering, since this part is listed for both sides on the supported Mercedes-Benz ML320, ML430, ML55 AMG, ML500, and ML350 applications. Confirm spline count, axle length, axle nut thread size, and ABS tone ring requirements against the original axle before installation. The included axle nut uses an M24 x 1.5 thread with a 36 mm hex and self-locking design.

Quality Assurance

TrakMotive MB-8010 is backed by a limited lifetime warranty. The manufacturer also notes ISO 9001:1007 and TS 16949:2009 certification for its production system.