/live/media/SA/SA_MI86006_Fro.jpg)
TrakMotive MI-86006 CV Axle Shaft - Front Right
| Brand | TrakMotive MI-86006 |
|---|---|
| Position | Front Right |
| ABS Ring Tooth Count | 0 |
| ABS Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | .81 |
| Axle Nut Height (mm) | 20 |
| Axle Nut Hex Size (in) | 1.25 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.44 |
| Axle Nut Length (mm) | 37 |
| Axle Nut Locking Type | Stake |
| Axle Nut Socket Size | 32 |
| Axle Nut Thread Size | M22x1.5 |
| Grade Type | Premium |
| Inboard Joint Boot Material | Neoprene |
| Inboard Joint Type | Female |
| Inboard Shaft Connection Style | Spline |
| Number Of Bolt Holes | 0 |
| Number Of Inboard Joint Bolt Holes | 0 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 28-2t |
| Number Of Outboard Joint Bolt Holes | 0 |
| Number Of Outboard Shaft Bolts | 0 |
| Number Of Outboard Splines | 28 |
| Outboard Joint Boot Material | Thermoplastic |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 24.75 |
| Overall Compressed Length (mm) | 629 |
| Overall Extended Length (in) | 26.81 |
| Product line | AAR CV Axle Shaft |
| Fits | Mitsubishi · 11 vehicles |
Premium grade. Built as a CV axle shaft for dependable driveline replacement.
Includes axle nut. Stake-locking hex nut is ready for installation.
Neoprene boot material. Helps protect the inboard joint from wear and contamination.
Cross-references TrakMotive MI-86006 for the same application. See all 1.
Front Right CV Axle for Mitsubishi Outlander
TrakMotive MI-86006 is a premium AAR CV axle shaft for the front right position on select Mitsubishi Outlander models. It is built with application-specific spline counts, sealed boots, and the correct axle nut hardware for a direct replacement on confirmed fitments.
Key Features
- Premium-grade CV axle shaft for front right driveline service
- Fits 2010-2020 Mitsubishi Outlander, front right, across confirmed applications
- Inboard joint type: female with spline connection style
- Outboard joint type: conventional with spline connection style
- Inboard boot material: neoprene
- Outboard boot material: thermoplastic
- Axle nut included with M22x1.5 thread, 32 mm socket size, and stake locking type
- Overall compressed length: 24.75 in (629 mm); overall extended length: 26.81 in (681 mm)
Product Details
TrakMotive MI-86006 is an AAR CV axle shaft engineered for Mitsubishi Outlander front right applications from 2010 through 2020, including 2010-2011 models with ID 3815A374, 2012-2013 OE AAR design applications, and 2014 US and Canada market vehicles with electric shift transfer case. It also covers 2015-2020 Outlander models, where the intermediate shaft should be inspected for damage and replaced if needed during CV axle service. The axle uses 28 inboard splines and 28 outboard splines, with no ABS tone ring included and no ABS ring tooth count specified.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Uses
- Restores front right axle transfer after clicking, binding, or vibration
- Replaces a worn or damaged CV joint on Mitsubishi Outlander drivetrains
- Addresses torn boots and grease loss that lead to joint wear
- Corrects axle noise during turns or acceleration
- Supports repair after intermediate shaft inspection on 2015-2020 Outlander service
Installation Notes
Verify the vehicle’s year, drivetrain configuration, and front right application before installation. For 2015-2020 Mitsubishi Outlander service, inspect the intermediate shaft for damage and replace it if necessary. Confirm axle nut thread size, socket size, and locking style during reassembly, and follow OE torque procedures for the final axle nut installation.
Quality Assurance
TrakMotive positions the MI-86006 as a premium AAR CV axle shaft with application-specific dimensions and hardware for confirmed Mitsubishi Outlander fitments. The part number MI-86006 is listed for direct replacement use on the vehicles shown above.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2020 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2019 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2018 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2017 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2016 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2015 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | When replacing a CV Axle, it is recommended that the intermediate shaft be inspected for damage and replaced if necessary; AAR CV Axle Shaft |
| 2014 | Mitsubishi | Outlander | — | 3.0L | V6 | Front Right | US Market & Canada Market with Electric Shift Transfer Case; AAR CV Axle Shaft |
| 2013 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | OE AAR design; AAR CV Axle Shaft |
| 2012 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | OE AAR design; AAR CV Axle Shaft |
| 2011 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | ID 3815A374; AAR CV Axle Shaft |
| 2010 | Mitsubishi | Outlander | AWD | 3.0L | V6 | Front Right | ID 3815A374; AAR CV Axle Shaft |
| No rows match your filter. | |||||||