/live/media/SA/SA_MZ8032_Fro.jpg)
TrakMotive MZ-8032 CV Axle Shaft - Front Left
| Brand | TrakMotive MZ-8032 |
|---|---|
| Position | Front Left |
| Abs Ring Tooth Count | 44 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 4/5 |
| Axle Nut Height (mm) | 20 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 31.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/3 |
| Axle Nut Length (mm) | 34.4 |
| Axle Nut Locking Type | Stake |
| Axle Nut Thread Size | M22*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Male |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 35 |
| Number Of Outboard Splines | 28 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 26.54 |
| Overall Compressed Length (mm) | 674 |
| Product line | CV Axle Shaft |
| Fits | Mazda and Ford · 17 vehicles |
New axle shaft. Built as a fresh replacement, not remanufactured.
Neoprene boot. Helps resist wear while keeping the joint protected.
ABS tone ring included. Ready for applications that use a toothed sensor ring.
Cross-references Cardone New 66-8032, Cardone Reman 60-8032 and Cardone Reman 60-8059 for the same application. See all 59.
CV Axle Shaft for Mazda 626, Ford Probe, and Mazda MX-6
Restore driveline performance with the TrakMotive MZ-8032 CV axle shaft. This new front left axle is built for 1994-2002 Mazda 626, 1994-1997 Ford Probe, and 1994-1997 Mazda MX-6 applications, with fitment details matched to the listed vehicles.
Key Features
- Brand: TrakMotive CV Axle Shaft
- Part number: MZ-8032
- Front left application
- New axle shaft construction
- Overall compressed length: 26.54 in. (674 mm)
- Inboard joint type: male
- Outboard joint type: conventional
- Boot material: neoprene
- ABS tone ring included with 44-tooth toothed ring
- Axle nut included: M22 x 1.5, 31.8 mm hex, stake-lock style
Product Details
The TrakMotive MZ-8032 CV axle shaft is engineered for front left driveline service on select Mazda and Ford vehicles. It features a 35-spline inboard connection, 28-spline outboard connection, and a neoprene boot for joint protection. The included ABS tone ring and axle nut support the listed applications, while the 26.54-inch compressed length helps match OE-style dimensions for proper axle placement. This part cross-references Cardone New 66-8032 for the same application.
What This Axle Shaft Helps Address
- Clicking or popping during turns caused by worn CV joints
- Vibration or shudder from a damaged axle assembly
- Grease leakage from a torn or deteriorated boot
- ABS warning concerns related to a worn tone ring or sensor signal issue
- Driveline noise from excessive axle wear
Installation Notes and Tips
Verify front left fitment against the vehicle year, make, model, and ABS configuration before installation. Compare spline counts, compressed length, and axle nut thread size to the original part. Use the included inboard guide tool noted for the listed applications, and follow factory torque procedures when tightening the axle nut.
Quality Assurance
TrakMotive backs this CV axle shaft with a limited lifetime warranty. The manufacturer states its products are produced under ISO 9001:1007 and TS 16949:2009 certified quality systems.
| Year | Make | Model | Transmission | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2002 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 2001 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 2000 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1999 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1998 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1997 | Ford | Probe | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1997 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1997 | Mazda | MX-6 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1996 | Ford | Probe | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1996 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1996 | Mazda | MX-6 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1995 | Ford | Probe | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1995 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1995 | Mazda | MX-6 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1994 | Ford | Probe | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1994 | Mazda | 626 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| 1994 | Mazda | MX-6 | Automatic | 2.0L | L4 | Front Left | Includes Inboard Guide Tool; CV Axle Shaft |
| No rows match your filter. | |||||||