/live/media/SA/SA_NI8388_Fro.jpg)
TrakMotive NI-8388 CV Axle Shaft - Front Right
| Brand | TrakMotive NI-8388 |
|---|---|
| Position | Front Right |
| Abs Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 1 |
| Axle Nut Height (mm) | 23.6 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 31.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/3 |
| Axle Nut Length (mm) | 34.4 |
| Axle Nut Locking Type | Cotter Pin |
| Axle Nut Thread Size | M24*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Male |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 27 |
| Number Of Outboard Splines | 32 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 38.82 |
| Overall Compressed Length (mm) | 986 |
| Product line | CV Axle Shaft |
| Fits | Nissan · 6 vehicles |
New replacement part. Built as a new CV axle shaft for dependable driveline service.
Neoprene boot. Helps resist wear while keeping the joint protected.
Axle nut included. Comes with a hex nut and cotter pin locking type.
Cross-references Cardone New 66-6431, TrakMotive NI-8388 and 391003NT0A for the same application. See all 9.
TrakMotive CV Axle Shaft for Nissan Altima
TrakMotive NI-8388 is a new CV axle shaft for the front right position on select 2013-2018 Nissan Altima models. It is built with a neoprene boot, a male inboard connection, and a conventional outboard joint for direct driveline service on the listed application.
Key Features
- Fits 2013-2018 Nissan Altima, front right
- New CV axle shaft for driveline replacement service
- Neoprene boot material for joint protection
- Male inboard shaft connection with 27 inboard splines
- Conventional outboard shaft connection with 32 outboard splines
- Includes axle nut with M24 x 1.5 thread, hex head, and cotter pin locking type
- Overall compressed length: 38.82 in. (986 mm)
- TrakMotive part number NI-8388
Product Details
This TrakMotive CV axle shaft is engineered for the front right side of the Nissan Altima across the 2013, 2014, 2015, 2016, 2017, and 2018 model years. The NI-8388 uses a male inboard shaft connection and a conventional outboard joint design, along with a neoprene boot to help protect the CV joints during operation. It is supplied as a new axle assembly and includes the axle nut specified for the application. TrakMotive NI-8388 cross-references Cardone New 66-6431 for the same application.
What This Part Helps Address
- Clicking or popping noises during turns from worn CV joints
- Vibration or shudder during acceleration
- Grease leakage from a damaged axle boot
- Excessive play in the front right driveline assembly
- Loss of smooth power transfer to the wheel
Installation Notes and Tips
Verify the vehicle is a 2013-2018 Nissan Altima with front right axle application before installation. Confirm spline count, axle nut thread size, and overall compressed length against the removed part to ensure proper fitment. Inspect the hub, seals, and surrounding suspension components during service, and torque the axle nut to the vehicle manufacturer’s specification using the correct locking method.
Quality Assurance
TrakMotive identifies this axle shaft as a new replacement part and states that its products are backed by a limited lifetime warranty. The company also notes ISO 9001:1007 and TS 16949:2009 certification.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2018 | Nissan | Altima | — | 2.5L | L4 | Front Right | CV Axle Shaft |
| 2017 | Nissan | Altima | — | 2.5L | L4 | Front Right | CV Axle Shaft |
| 2016 | Nissan | Altima | — | 2.5L | L4 | Front Right | CV Axle Shaft |
| 2015 | Nissan | Altima | — | 2.5L | L4 | Front Right | CV Axle Shaft |
| 2014 | Nissan | Altima | Sedan | 2.5L | L4 | Front Right | CV Axle Shaft |
| 2013 | Nissan | Altima | Sedan | 2.5L | L4 | Front Right | CV Axle Shaft |
| No rows match your filter. | |||||||